How to clean the water tank?

Detail Links==  SU DEPOSU TEMİZLİK
First of all, the company that will provide water tank cleaning service must have the necessary authorization and accreditation documents in full. The questioning of these documents by the service receiving institution will enable the service received to be of higher quality and to produce healthy results.
The Ministry of Health Biocidal product application permit, ISO inspection certificate, GSM license, OSGB contract, OSGB physician contract, CE certificates of the equipment used, Emergency action plans, Risk analysis reports of the organizations that will provide water tank cleaning services must be complete.
Hygiene certificates, vocational training certificates, occupational safety certificates, porter health examination reports, certificates for working at heights, training certificates for working indoors must be mandatory for the personnel who will provide water tank cleaning services.
How to clean the water tank?
1. Personnel who will provide water tank cleaning service should take the necessary occupational safety precautions and measures.
2. Before entering the water tank, the inside of the tank is illuminated by projectors and tests are carried out against the possibility of toxic gas.
3. In order not to be poisoned by the air, just in case, snail ventilation systems are installed.
4. Entering the tank, the team starts the submersible motor with a traction capacity of 0.1 mm and starts washing the lateral walls of the tank and the floor. The pre-pollution that comes out is thrown out of the tank by means of submersible motors.
5. All floors and lateral walls are brushed with disinfectants prescribed by the Ministry of Health. These disinfectants can be either biocidal products, pure ozone or neutralized ozone, depending on demand.
6. After this application, the inside of the tank is completely washed with pumps with a pressure capacity of 150 bar.
7. After this washing, the dirt accumulated on the floor is discharged back out of the tank by the submersible motors.
8. After this washing, a rinsing application is made again.
9. After this application, the team exits the water tank and performs ULV 25 mm micro-field sterilization from the cover. With this application, contact is made to any place that has not been contacted and the water tank is biologically purified from pollution.
10. After the procedures, the float and similar working parts of the water tank are checked. If a mishap is detected, it is immediately reported to the company manager for change.
11. A sticker for control records is attached to each water tank whose application is completed. After the procedure, the EL-2 service form with a stamp is filled and delivered to the authorized person of the institution receiving the service.

Water tank cleaning can be applied to any tank.
What are the types of tanks that clean the water tank?
1. Steel water tank cleaning
2. Sheet water tank cleaning
3. Galvanized water tank cleaning
4. Concrete water tank cleaning
5. Tile water tank cleaning
6. Cleaning the plastic water tank
7. Polyethylene water tank cleaning
8. Fiber water tank cleaning
In addition to the qualities of the water tank, water tank cleaning service is provided according to the qualities of the water used. The most important thing to consider here is drinking water. We definitely do not recommend the use of biocidal products in the cleaning service of drinking water tanks.
According to the qualities of the water used, we can describe them as rain water tanks, septic tank manhole tanks, drinking water tanks, network water tanks.
We also receive requests for raw water tanks or soft water tanks. Raw water tanks are the warehouses where the water coming from the network or the source first enters and is collected. Soft water tanks, on the other hand, are the collection of the water coming out of the raw water to this tank.
This system is very accurate to use. In the raw water tank, substances that should not be in the water, such as mud, dust, soil, usually coming from the mains, settle to the bottom because they are heavier than water.
The clean water at the top is also transferred to the soft water tank. So soft water tanks are always cleaner than raw water tanks.
Coliform, Enterecoccus and E.Coli are the leading bacteria that reproduce in water tanks. These bacteria are generally disease-causing. Not drinking the water from the tanks contaminated with these bacteria is definitely not a method of protection.
When we wash fruits or vegetables with this water or in personal cleaning, that is, when contacted, the risk continues with its final severity. In order not to be exposed to these negative situations, as in the article C of the Ministry of Health 2007-67 that our people should pay attention to; Cleaning and disinfection of water tanks should be done within 180 days, ie 6 months.
Our organization Tekdez Disinfecte provides water tank cleaning and disinfection services through its qualified professional teams throughout Turkey.