I am Austin Delatorre – A swimming pool lighting expert, I have written many articles sharing knowledge about pool lights at BLLS-Lighting.
Recent Updates
  • Swimming Pool Lights
    Swimming pool lights, or underwater lights, have become a staple in all pools. Today, there are numerous manufacturers offering a wide range of light fixtures to enhance your swimming experience. From Pac-Fab, Paragon, and Purex to Hayward, Jandy, and Jacuzzi, the choices are endless. These companies, all owned by Pentair, have contributed to the pool lighting industry with their innovative...
    0 Comments 0 Shares 211 Views
  • How To Test and Fix a Green Pool
    Is your pool looking more like a swamp? Don't worry, we’ve got you covered. In this article, we'll walk you through the steps to bring your pool back to its sparkling clean state. Let's dive in! 5 Simple Steps to Restore Your Pool's Beauty Balance the pH and Shock with Chlorine: The most common reason for a green pool is the growth of algae. To combat this, regularly check and balance...
    0 Comments 0 Shares 615 Views
  • 10 Best Pool Led Lights Review

    >>> See More 12V LED Strip Lights vs 24V LED Strip Lights at https://www.flickr.com/photos/bestledlightstripsblls/53414556170

    Are you looking to add some pizzazz and create a stunning ambiance in your pool area? Look no further! In this article, we have carefully researched and reviewed the top pool LED lights to help you make an informed decision. From brightness levels and color options to ease of installation, we've got you covered. Let's dive in!

    Our Top Picks

    Here are our expert recommendations for the best pool LED lights:

    Kimdelee Outdoor LED Strip Lights Waterproof
    UZOPI Submersible LED Pool Lights 2 Pack
    FGRYB Submersible Pool Lights 4 Pack
    YiaMia Submersible LED Pool Lights 2-Pack
    QOLNBY Pool Lights 4 Pack

    >>> See More How to Install LED Light Strip for Your Smart Home Set Up at https://band.us/band/90424574/post/33

    Essential Factors to Consider

    When choosing pool LED lights, there are a few crucial factors to keep in mind:

    Brightness Level

    Consider the brightness level of the lights. You want your pool to shine bright and beautifully, so opt for lights that offer ample illumination.

    Color Options

    Have fun with the colors! Look for pool LED lights that offer a variety of vibrant hues. Some models even allow you to change the colors remotely, allowing you to create different lighting effects and moods.

    Installation Process

    While it is possible to install pool LED lights yourself, it's recommended to hire a professional. They have the expertise and tools to ensure a safe and correct installation, avoiding potential hazards.

    Customer Reviews

    Don't forget to read customer reviews. They can provide valuable insights into the quality and performance of the product. Consider the experiences of others before making your purchase.

    >>> See More LED Strip Lights: Enhancing Your Space with Versatile Ceiling Lighting at https://hub.docker.com/r/bestledlightstripsblls/led-strip-lights-enhancing-your-space-with-versatile-ceiling-lighting
    10 Best Pool Led Lights Review >>> See More 12V LED Strip Lights vs 24V LED Strip Lights at https://www.flickr.com/photos/bestledlightstripsblls/53414556170 Are you looking to add some pizzazz and create a stunning ambiance in your pool area? Look no further! In this article, we have carefully researched and reviewed the top pool LED lights to help you make an informed decision. From brightness levels and color options to ease of installation, we've got you covered. Let's dive in! Our Top Picks Here are our expert recommendations for the best pool LED lights: Kimdelee Outdoor LED Strip Lights Waterproof UZOPI Submersible LED Pool Lights 2 Pack FGRYB Submersible Pool Lights 4 Pack YiaMia Submersible LED Pool Lights 2-Pack QOLNBY Pool Lights 4 Pack >>> See More How to Install LED Light Strip for Your Smart Home Set Up at https://band.us/band/90424574/post/33 Essential Factors to Consider When choosing pool LED lights, there are a few crucial factors to keep in mind: Brightness Level Consider the brightness level of the lights. You want your pool to shine bright and beautifully, so opt for lights that offer ample illumination. Color Options Have fun with the colors! Look for pool LED lights that offer a variety of vibrant hues. Some models even allow you to change the colors remotely, allowing you to create different lighting effects and moods. Installation Process While it is possible to install pool LED lights yourself, it's recommended to hire a professional. They have the expertise and tools to ensure a safe and correct installation, avoiding potential hazards. Customer Reviews Don't forget to read customer reviews. They can provide valuable insights into the quality and performance of the product. Consider the experiences of others before making your purchase. >>> See More LED Strip Lights: Enhancing Your Space with Versatile Ceiling Lighting at https://hub.docker.com/r/bestledlightstripsblls/led-strip-lights-enhancing-your-space-with-versatile-ceiling-lighting
    0 Comments 0 Shares 3527 Views
  • Looking for pool parts?

    >>> See More What are LED Strip Lights Vs Rope Lights, Best Places to Use at https://www.linkedin.com/posts/bestledlightstripsblls_what-are-led-strip-lights-vs-rope-lights-activity-7036914924828127232-IzO2/

    Have you been considering upgrading your plain white pool light to a vibrant color-changing LED? Look no further! In this Poolside Repair web series, we, Matt and Rob, pool enthusiasts, meet up with real pool owners to troubleshoot, repair, or install anything pool-related. Today, we'll guide you through the process of replacing your pool light with a LED Pureline PureColors light.

    Step 1 - Choosing the Right Replacement Light

    The first step is to select the perfect LED light to fit your pool's niche and cord length. Most incandescent pool lights are around 10.12 inches in diameter, making drop-in replacements like the Pentair Intellibrite, Hayward Colorlogic, and Pureline PureColors ideal options. If you're unsure about the measurements or have any doubts, don't hesitate to reach out to us for assistance.

    Ensure you measure the distance from the pool light niche to the power source, the rise from the pool light to the power source, and add an additional five to eight feet for future maintenance requirements.

    Step 2 - Turning Off Power and Cutting the Cable

    Before removing the old light, it's crucial to make the light circuit safe. Turn off the breaker for the light, then remove the light from the niche and cut the power cable just behind the light fixture.

    Step 3 - Preparing the Niche and Conduit

    To install the new cable, we need to remove the watertight seal that attaches it to the niche. If your light's cable was sealed with epoxy, carefully remove it using a needle-nosed plier and a flathead screwdriver. For easier and quicker removal, we hope your light has a rubber cord stopper, which can be reused. In our installation, we're using a cord stopper.

    Step 4 - Connecting the New and Old Cables

    To simplify the process, tape the new cable to the old cable before pulling it out. This way, you remove the old cable while simultaneously reinstalling the new light cable. Make sure to use heavy-duty duct tape to secure and intertwine the two cables together.

    >>> See More Guide How To Fix The LED Light Strip Like a Pro at https://bestledlightstripsblls.blogspot.com/2023/08/guide-how-to-fix-led-light-strip-like.html

    Step 5 - Pulling the Old Cable Through

    Now, with a firm grip, start pulling the old cable through the conduit. If you encounter any resistance, apply a spray-on silicon lube for smoother movement. In our installation, the cables came loose, so we used a fish tape to pull the new cable. Remember to leave five to eight feet of cable on the fixture end for future maintenance purposes before cutting it.

    Step 6 - Installing the Light Into the Niche

    With the cable in place, screw in the lock screw to secure the light into the niche.

    Step 7 - Wiring Your LED Pool Light

    Wiring the LED light should be similar to your previous light, but it's always wise to follow the instructions provided in the owner's manual for safety. Ensure a proper and secure connection.

    Step 8 - Enjoy Your New Light

    Congratulations! You've successfully installed your new LED pool light. Sit ****, relax, and enjoy the beautiful underwater ambiance it creates. Thank you for joining us on this Poolside Repair episode. Stay tuned for our next installment where we guide you through the installation of a DE filter.

    >>> See More Illuminate Your Space with Cutting-Edge LED Lights | Outdoor rope lights, Led rope lights, Led string lights outdoor at https://www.pinterest.com/pin/934496991408933981/
    Looking for pool parts? >>> See More What are LED Strip Lights Vs Rope Lights, Best Places to Use at https://www.linkedin.com/posts/bestledlightstripsblls_what-are-led-strip-lights-vs-rope-lights-activity-7036914924828127232-IzO2/ Have you been considering upgrading your plain white pool light to a vibrant color-changing LED? Look no further! In this Poolside Repair web series, we, Matt and Rob, pool enthusiasts, meet up with real pool owners to troubleshoot, repair, or install anything pool-related. Today, we'll guide you through the process of replacing your pool light with a LED Pureline PureColors light. Step 1 - Choosing the Right Replacement Light The first step is to select the perfect LED light to fit your pool's niche and cord length. Most incandescent pool lights are around 10.12 inches in diameter, making drop-in replacements like the Pentair Intellibrite, Hayward Colorlogic, and Pureline PureColors ideal options. If you're unsure about the measurements or have any doubts, don't hesitate to reach out to us for assistance. Ensure you measure the distance from the pool light niche to the power source, the rise from the pool light to the power source, and add an additional five to eight feet for future maintenance requirements. Step 2 - Turning Off Power and Cutting the Cable Before removing the old light, it's crucial to make the light circuit safe. Turn off the breaker for the light, then remove the light from the niche and cut the power cable just behind the light fixture. Step 3 - Preparing the Niche and Conduit To install the new cable, we need to remove the watertight seal that attaches it to the niche. If your light's cable was sealed with epoxy, carefully remove it using a needle-nosed plier and a flathead screwdriver. For easier and quicker removal, we hope your light has a rubber cord stopper, which can be reused. In our installation, we're using a cord stopper. Step 4 - Connecting the New and Old Cables To simplify the process, tape the new cable to the old cable before pulling it out. This way, you remove the old cable while simultaneously reinstalling the new light cable. Make sure to use heavy-duty duct tape to secure and intertwine the two cables together. >>> See More Guide How To Fix The LED Light Strip Like a Pro at https://bestledlightstripsblls.blogspot.com/2023/08/guide-how-to-fix-led-light-strip-like.html Step 5 - Pulling the Old Cable Through Now, with a firm grip, start pulling the old cable through the conduit. If you encounter any resistance, apply a spray-on silicon lube for smoother movement. In our installation, the cables came loose, so we used a fish tape to pull the new cable. Remember to leave five to eight feet of cable on the fixture end for future maintenance purposes before cutting it. Step 6 - Installing the Light Into the Niche With the cable in place, screw in the lock screw to secure the light into the niche. Step 7 - Wiring Your LED Pool Light Wiring the LED light should be similar to your previous light, but it's always wise to follow the instructions provided in the owner's manual for safety. Ensure a proper and secure connection. Step 8 - Enjoy Your New Light Congratulations! You've successfully installed your new LED pool light. Sit back, relax, and enjoy the beautiful underwater ambiance it creates. Thank you for joining us on this Poolside Repair episode. Stay tuned for our next installment where we guide you through the installation of a DE filter. >>> See More Illuminate Your Space with Cutting-Edge LED Lights | Outdoor rope lights, Led rope lights, Led string lights outdoor at https://www.pinterest.com/pin/934496991408933981/
    0 Comments 0 Shares 4897 Views

  • Inground Pool Light Leak Repair

    In the quest for a pristine and well-maintained inground pool, the issue of light leaks can pose a significant challenge. Inground swimming pool lights are prone to leakage from the conduit, which is the pipe that carries the light cord from the lamp to the junction box. A pool light conduit is ¾” or 1” gray PVC pipe, running under the deck. The pipe can allow water entry because it lacks sealing where it connects to the light niche. In some cases, water in the conduit may freeze solid, cracking the conduit and start to leak out from the pool. In other cases, the conduit can be cracked during deck placement, or from shifting soils or sliding slabs.
    >>> See more What Is The Difference Between Rope Lights And LED Strip Lights? at: https://band.us/band/90424574/post/3

    Is The Pool Light Leaking?
    The way to determine a pool light leak is by continuing to operate the pool on main drain only (close or plug the skimmers), and allowing the water level to drop. If the water level seems to stabilize at the level of the light, or more precisely, just a few inches below the top of the light – you may have a conduit leak. To be certain, you can add a few inches of water and shut off the pump, plugging the skimmers, returns and the main drain pipes, and any other pool plumbing lines, with expansion plugs.

    If an inground gunite pool continues to leak with all the lines plugged tightly and the pump shut off – that means that there is a leak in the pool shell or the pool light. Vinyl liner pools have to rule out leaks in the liner, or anywhere the liner was purposely cut; such as the steps, skimmer, return, drain and pool light.

    For more advanced leak detection, Anderson Manufacturing makes a Pool Light Tester, allowing you to seal up against the pool wall, and add leak testing dye to watch if it gets sucked out of the conduit.
    >>> See more Determining the Number of Lights at: https://universeodon.com/@bestledlightstripsblls/111247737244971512

    How Low Can You Go?
    If the water level continues to drop below the halfway point of the light, you may have a conduit leak. However, there is also some other leak somewhere else. A conduit leak will only leak down to the port on the upper **** of the light niche, where the conduit connects.

    Pool Light Niche Leaking?
    Pool light niches rarely leak. It’s extremely rare for a pool light to be leaking through the shell of the light niche, or around the light niche. 99% of the time a pool light is leaking, water is running out through the light conduit. Vinyl pools, however, have the light niche gasket sealed to the pool wall, which has more leak potential around the niche.

    Is There Water Inside?
    If there is water inside the lens of the pool light, which you can usually see from on-deck, that doesn’t mean that the light is leaking, it does mean that the lamp gasket has failed, letting water leak inside and surround the bulb. Correct this potentially hazardous situation, but note that it is not the source of the pool leak.

    Fixing a Pool Light Conduit Leak
    Relax, we won’t be digging up the broken light conduit, there are a few ways to seal up the light conduit from inside the pool, where it connects to the **** of the light niche.

    Silicone: With the water level at mid-light or lower, squirt silicone rubber up into the conduit, and around where the light cord enters the port. Clean the areas beforehand, to improve the bond and seal.

    Pool Putty: Mix up half of the epoxy/resin Pool Putty, and pack it around the (cleaned up) light cord and connection port. Make a cone of putty that seals up against the niche, cord, and port. Fill the pool **** up, and allow the light to remain on deck for 24 hours, to allow the putty to dry. Carefully reinstall the light to avoid disturbance to the putty.

    Light Cord Stopper: For the most permanent solution to a pool light conduit leak, seal up the hole in the light niche with a Light Cord Stopper. Made in two sizes, to fit 3/4″ or 1″ hole, with a hole running through it to allow the light cord to pass through. Just push it in place firmly to keep water from entering the conduit.
    >>> See more How Long Do LED Pool Lights Last? at: https://www.deviantart.com/ledlightsblls/status-update/How-Long-Do-LED-Pool-988508341

    Inground Pool Light Leak Repair In the quest for a pristine and well-maintained inground pool, the issue of light leaks can pose a significant challenge. Inground swimming pool lights are prone to leakage from the conduit, which is the pipe that carries the light cord from the lamp to the junction box. A pool light conduit is ¾” or 1” gray PVC pipe, running under the deck. The pipe can allow water entry because it lacks sealing where it connects to the light niche. In some cases, water in the conduit may freeze solid, cracking the conduit and start to leak out from the pool. In other cases, the conduit can be cracked during deck placement, or from shifting soils or sliding slabs. >>> See more What Is The Difference Between Rope Lights And LED Strip Lights? at: https://band.us/band/90424574/post/3 Is The Pool Light Leaking? The way to determine a pool light leak is by continuing to operate the pool on main drain only (close or plug the skimmers), and allowing the water level to drop. If the water level seems to stabilize at the level of the light, or more precisely, just a few inches below the top of the light – you may have a conduit leak. To be certain, you can add a few inches of water and shut off the pump, plugging the skimmers, returns and the main drain pipes, and any other pool plumbing lines, with expansion plugs. If an inground gunite pool continues to leak with all the lines plugged tightly and the pump shut off – that means that there is a leak in the pool shell or the pool light. Vinyl liner pools have to rule out leaks in the liner, or anywhere the liner was purposely cut; such as the steps, skimmer, return, drain and pool light. For more advanced leak detection, Anderson Manufacturing makes a Pool Light Tester, allowing you to seal up against the pool wall, and add leak testing dye to watch if it gets sucked out of the conduit. >>> See more Determining the Number of Lights at: https://universeodon.com/@bestledlightstripsblls/111247737244971512 How Low Can You Go? If the water level continues to drop below the halfway point of the light, you may have a conduit leak. However, there is also some other leak somewhere else. A conduit leak will only leak down to the port on the upper back of the light niche, where the conduit connects. Pool Light Niche Leaking? Pool light niches rarely leak. It’s extremely rare for a pool light to be leaking through the shell of the light niche, or around the light niche. 99% of the time a pool light is leaking, water is running out through the light conduit. Vinyl pools, however, have the light niche gasket sealed to the pool wall, which has more leak potential around the niche. Is There Water Inside? If there is water inside the lens of the pool light, which you can usually see from on-deck, that doesn’t mean that the light is leaking, it does mean that the lamp gasket has failed, letting water leak inside and surround the bulb. Correct this potentially hazardous situation, but note that it is not the source of the pool leak. Fixing a Pool Light Conduit Leak Relax, we won’t be digging up the broken light conduit, there are a few ways to seal up the light conduit from inside the pool, where it connects to the back of the light niche. Silicone: With the water level at mid-light or lower, squirt silicone rubber up into the conduit, and around where the light cord enters the port. Clean the areas beforehand, to improve the bond and seal. Pool Putty: Mix up half of the epoxy/resin Pool Putty, and pack it around the (cleaned up) light cord and connection port. Make a cone of putty that seals up against the niche, cord, and port. Fill the pool back up, and allow the light to remain on deck for 24 hours, to allow the putty to dry. Carefully reinstall the light to avoid disturbance to the putty. Light Cord Stopper: For the most permanent solution to a pool light conduit leak, seal up the hole in the light niche with a Light Cord Stopper. Made in two sizes, to fit 3/4″ or 1″ hole, with a hole running through it to allow the light cord to pass through. Just push it in place firmly to keep water from entering the conduit. >>> See more How Long Do LED Pool Lights Last? at: https://www.deviantart.com/ledlightsblls/status-update/How-Long-Do-LED-Pool-988508341
    0 Comments 0 Shares 4825 Views
  • Exploring Vital Factors for LED Strip Lights Purchase

    Are you starting a lighting project with LED strip lights? Here are some crucial factors to consider when making your selection. LED strips are known by various names such as LED light strips, LED strip lighting, LED tape, and flexible LED ribbon. Interestingly, these terms are interchangeable, describing the same product in different ways.

    Beyond just the names, you might encounter additional details such as a 4-digit number or a combination of 2 letters and 2 numbers. Understanding the significance of these elements is vital, as they provide important information about the product. You may have seen discussions about the wide variety of LED strips and the different types of LED diodes available in the lighting market in our previous articles or on various websites.

    Understanding the terminology is an essential first step before considering other important factors. With a plethora of LED strip options available on the market, deciphering the meanings behind these terms and numbers will help you make informed decisions as you navigate through your choices.

    >>>See More Exploring Vital Factors for LED Strip Lights Purchase at: https://band.us/band/90424574/post/40

    Considerations for LED Strip Size

    Size is a critical factor to consider when it comes to LED strip lights, impacting both their performance and installation process. For instance, 3528 diodes typically come with a standard strip width of 8mm, which is also shared with 2835 diodes. However, it's important to note that 3528 diodes can sometimes be found on strips with a narrower 5mm width. Conversely, strips containing 5050 diodes boast a wider profile, measuring 10mm in width.

    The width of the strip becomes especially important when planning to install them within an aluminum profile. If you're considering this setup, it's crucial to take into account the dimensions of the LED strip to ensure compatibility with the selected profile. In essence, in the realm of LED strip lights, size is a significant factor – particularly when it comes to specific applications such as fitting them into aluminum profiles to achieve an optimal lighting arrangement.

    Understanding Light Tones: Kelvin Scale in LED Lighting

    The array of names such as warm white, neutral white, daylight, cool white, and cold white may seem perplexing, but they all denote different shades of white light emitted by LEDs. However, what truly holds significance in this context is not the name itself, but rather the value indicated by the pivotal letter "K," representing Kelvin.

    The Kelvin scale plays a crucial role in defining the color temperature of light. Typically, LED lamps fall within the spectrum of 3000K to 6000K. At the lower end of the scale (3000K), warmer, more yellowish light is produced, while at the higher end (6000K), cooler, bluer light is emitted. Therefore, when selecting LED lights, paying attention to the Kelvin value ensures that you achieve the desired tone, aligning with your lighting preferences and the ambiance you aim to create.

    >>>See more Understanding Light Tones: Kelvin Scale in LED Lighting at: https://www.besport.com/post/45072517


    Choosing the Right IP Rating for LED Strips

    Selecting the appropriate Ingress Protection (IP) rating is essential when choosing LED strip lights for specific applications. Non-waterproof strips, typically rated as IP20, are ideal for indoor, dry environments or when installed inside aluminum profiles. However, they are not suitable for areas prone to moisture, such as bathrooms or outdoor spaces.

    For bathroom use, it is recommended to opt for strips with higher IP ratings, such as IP54 (protected with silicone) or IP65 (featuring NANO technology cover). These ratings provide protection against water exposure, making them suitable for installation in wet areas.

    If you intend to illuminate outdoor spaces like gardens, consider using strips with IP67 or IP68 ratings, which are encased in plastic tubing. These higher IP ratings offer superior protection against water and environmental elements, ensuring durability in outdoor settings where exposure to moisture is inevitable. Making an informed decision based on the IP rating ensures the longevity and safety of your LED strip lights across different environments.

    >>> See More Choosing the Right IP Rating for LED Strips at: https://www.hahalolo.com/post/65a74e67de22ac0a03041ffc

    Exploring Vital Factors for LED Strip Lights Purchase Are you starting a lighting project with LED strip lights? Here are some crucial factors to consider when making your selection. LED strips are known by various names such as LED light strips, LED strip lighting, LED tape, and flexible LED ribbon. Interestingly, these terms are interchangeable, describing the same product in different ways. Beyond just the names, you might encounter additional details such as a 4-digit number or a combination of 2 letters and 2 numbers. Understanding the significance of these elements is vital, as they provide important information about the product. You may have seen discussions about the wide variety of LED strips and the different types of LED diodes available in the lighting market in our previous articles or on various websites. Understanding the terminology is an essential first step before considering other important factors. With a plethora of LED strip options available on the market, deciphering the meanings behind these terms and numbers will help you make informed decisions as you navigate through your choices. >>>See More Exploring Vital Factors for LED Strip Lights Purchase at: https://band.us/band/90424574/post/40 Considerations for LED Strip Size Size is a critical factor to consider when it comes to LED strip lights, impacting both their performance and installation process. For instance, 3528 diodes typically come with a standard strip width of 8mm, which is also shared with 2835 diodes. However, it's important to note that 3528 diodes can sometimes be found on strips with a narrower 5mm width. Conversely, strips containing 5050 diodes boast a wider profile, measuring 10mm in width. The width of the strip becomes especially important when planning to install them within an aluminum profile. If you're considering this setup, it's crucial to take into account the dimensions of the LED strip to ensure compatibility with the selected profile. In essence, in the realm of LED strip lights, size is a significant factor – particularly when it comes to specific applications such as fitting them into aluminum profiles to achieve an optimal lighting arrangement. Understanding Light Tones: Kelvin Scale in LED Lighting The array of names such as warm white, neutral white, daylight, cool white, and cold white may seem perplexing, but they all denote different shades of white light emitted by LEDs. However, what truly holds significance in this context is not the name itself, but rather the value indicated by the pivotal letter "K," representing Kelvin. The Kelvin scale plays a crucial role in defining the color temperature of light. Typically, LED lamps fall within the spectrum of 3000K to 6000K. At the lower end of the scale (3000K), warmer, more yellowish light is produced, while at the higher end (6000K), cooler, bluer light is emitted. Therefore, when selecting LED lights, paying attention to the Kelvin value ensures that you achieve the desired tone, aligning with your lighting preferences and the ambiance you aim to create. >>>See more Understanding Light Tones: Kelvin Scale in LED Lighting at: https://www.besport.com/post/45072517 Choosing the Right IP Rating for LED Strips Selecting the appropriate Ingress Protection (IP) rating is essential when choosing LED strip lights for specific applications. Non-waterproof strips, typically rated as IP20, are ideal for indoor, dry environments or when installed inside aluminum profiles. However, they are not suitable for areas prone to moisture, such as bathrooms or outdoor spaces. For bathroom use, it is recommended to opt for strips with higher IP ratings, such as IP54 (protected with silicone) or IP65 (featuring NANO technology cover). These ratings provide protection against water exposure, making them suitable for installation in wet areas. If you intend to illuminate outdoor spaces like gardens, consider using strips with IP67 or IP68 ratings, which are encased in plastic tubing. These higher IP ratings offer superior protection against water and environmental elements, ensuring durability in outdoor settings where exposure to moisture is inevitable. Making an informed decision based on the IP rating ensures the longevity and safety of your LED strip lights across different environments. >>> See More Choosing the Right IP Rating for LED Strips at: https://www.hahalolo.com/post/65a74e67de22ac0a03041ffc
    0 Comments 0 Shares 5985 Views
  • 0 Comments 0 Shares 119 Views
More Stories