If you have an HP printer, then there is a possibility that you may encounter this error state in Windows 10, Mac, etc. There are various error states that cause various issues with your printer. However, these errors are temporary and can be fixed by using some simple and quick troubleshooting methods. hp printer is in error state windows 10, is a common issue and usually encountered when you try to send any file to print. HP printers are known for their reliability and quality services, but instances occur when you have to deal with such issues.

You must have come across with HP Printer in Error State Windows 10 while sending documents to print. There are plenty of reasons for it. One of which is your turned-off printer or just no connectivity to a WiFi network among others. HP printers tend to be the most reliable printers. However, it faces flak for the HP printer in an error state in Windows 10. It usually happens while upgrading the new operating system. At that time, the printer drivers tend to be incompatible with the new updates in your system.

Methods to Resolve HP Printer in Error State Windows 10:

1- Change Port Settings:

• Go to your system and press the Windows key along with R, now enter devmgmt.msc and press the enter button.
• Now you are in the device manager, click on “View” given on the menu’s top. Under this select “Show Hidden Devices.”
• Look for “Ports (COM & LPT)” and right-click on it to select “Properties.”
• After this, open the “Port Settings” tab and then go to the “Properties.”
• Here you need to select “Use any interrupt assigned to the port.”
• Now enable the “Enable legacy Plug and Play detection” option and click OK.
• After completing all these steps, remember to reboot your system.

2- Reinstall the Drivers of your Printer:

Drivers are one of the main causes of HP Printer in error state Windows 10. Updating and verifying your drivers is important because it helps avoid various issues you might encounter in the future. Below we have given the steps to reinstall the drivers; you can take help from there.

• Go to the “Control Panel” of your system; under this, you need to select “Device and Printers.”
• Now look for your printer and right-click on it; from the list of options, select “Remove Device.”
• Confirm the removal of the device and reboot your device.
• As the reboot completes, the device will automatically detect and install your printer. To know more about printer is in an error state windows 11.
• If the device doesn’t detect your printer automatically, then try the unplug and plug approach to fix it.