Before you start cutting the material with a knife blade, you need to understand the basic requirements. For instance, loading material on the Cricut mat requires delicacy and caution. Here, you can learn how to do it. If you are confused about the types of Cricut mat to use, check out cricut.com/setup. It will resolve your confusion with proper guidelines.

1. First, you need to cut down the Cricut material to the size required for your project.

2. Make sure that your Cricut material is never wider than 11”.

3. Otherwise, the material will pass through the star wheels during the cutting process.

4. Then, take your material and tape all four sides to the mat.

5. Here, the recommendation is blue painter’s tape and masking tape.

6. The adhesive of the mat is designed to hold down the cut in the correct place firmly.

7. Also, the mat’s adhesive is prepared to release the cuts without damaging the material or machine.

8. The adhesive is created with such stickiness to match the speed of the knife blade, as it cuts with 10x pressure.

9. Now, you must use a tape that offers light adhesive, such as printer’s tape.

10. These types of tape will be strong enough to hold the material in position and light enough to release it without damaging anything.

11. If the tape is very sticky, it might remove the top layer of the material while removing the tape, or it may leave leftovers.