Arise is an audited, leading web guiding system manufacturer in China with a professional R & D team. Arise can provide an advanced web guide sensor for continuous and accurate edge position control of coil materials.

AE400 CCD Image Sensor

AE400 CCD image sensor adopts an imported CCD sensor and the lens. It can track the edges of various materials with a real-time screen display and an easy full-touch operation.

1. No need for polarity conversion.

When the coil baseline and line asymptotically or the left and right edges are reversed, there is no need to switch the polarity of the control output.

2. No need to re-adjust the gain.

The deviation of the edge from the output voltage is not affected by the width or color of the line. Therefore, once the gain of the controller is set during the test run, there is no need to re-adjust the gain.

3. Position signal hold function.

When a line leaves the field of view and when it returns, the position signal generated immediately before the line leaves the field of view is maintained and output. Therefore, when the web bending speed is fast and the line (edge) will be out of the field of view, the tracking operation will be performed.

4. The line (edge) position is displayed by LED.

The control action, even if the integral action is standard, can also be combined with the position transmitter to perform proportional action. The most suitable control action can be selected according to the machine used.

5. When the detected edge is in the center of the field of view, an LED indicator lights up.

When the device is connected to a controller with a drive lock input, in the case of intermittent lines, when an interruption is detected in the line, the drive is locked and the tracking operation is stopped until the next line appears.

A100 Infrared Edge Sensor For Reading Web Edge

Arise A100 infrared edge sensors are specifically designed to read the edge of webs which has the features of sound-transparent, thick weaves and non-transparent. The web guide sensor uses an infrared LED as the light source. The light is reflected through the material and is then recorded by a CCD line. The CCD elements illuminated in this way in the edge sensor issue a higher signal level. The signal level can be converted into an output value proportional to the web edge position.

Features

1. Adopting high-speed DSP chip, full digital processing, truly no drift, strong anti-interference ability

2. Adopting imported infrared-sensitive components with 0.01mm resolution

3. Fully sealed titanium alloy shell design with special surface treatment, to prevent dust and pollution, anti-corrosion

4. It can detect any material (including mesh material) without adjustment

5. DC12V single power supply, 0-5V analog output, two switch output

6. Easy setup

A200 Ultrasonic Edge Sensor For Precise Web Guiding

In the process of web guiding, the web edge control can be realized by an edge sensor. The ultrasonic web guide sensors are designed for detecting the edges of materials such as paper, a plastic film of any color, with reliable and certain identification of deviations. When the receiver establishes an analog voltage signal that is proportional to the impulse intensity. Then the web reaches the air gap, the impulses are weakened, which makes the sensor to precisely recognize the web edge.

Advantages

1. Adopting high-speed DSP chip, full digital processing, truly no drift, strong anti-interference ability

2. Adopting Japanese Fuji high-precision ultrasonic sensitive components with 0.01mm resolution

3. Fully sealed titanium alloy shell design with special surface treatment, to prevent dust and pollution, anti-corrosion

4. The ambient noise of the workshop has no effect on ARISE's unique ultrasonic technology

5. It can detect any material (including mesh material) without adjustment

6. DC12V single power supply, 0-5V analog output, two switch output