How to Troubleshoot the Clutch?
As an assembly part directly connected with the engine in the automobile drive train, the clutch is an assembly part directly connected with the engine in the automobile drive train. It is used to ensure the vehicle starts smoothly and shifts smoothly, so it is also expensive and malfunctions. More parts.
- Failure phenomenon:
Depress the clutch pedal to the end, and the power between the active and driven plates of the clutch cannot be completely cut off, resulting in difficulty in gear shifting, gearing or inability to stop, and the clutch heating.
- The cause of the fault and its elimination
①The clearance between the clutch release pawl and release bearing is too large;
Should be adjusted to the range of 0.3-0.5 mm.
②The free stroke of the clutch pedal is too large;
Should be adjusted to within 20-40 mm.
③The clutch driven disc is severely warped, deformed or corroded;
Correction or replacement of new parts or removal of rust.
④The clutch shaft chain is worn out, and the driven disc cannot move;
Should be repaired or replaced with new ones.
⑤The three separating levers are not easy to lie on the same rotating plane, resulting in different spring forces;
Should be readjusted as required.
⑥The friction plate is broken;
It should be replaced with a new one.
⑦The clutch bearing is damaged, causing the clutch to move axially when the clutch is disconnected
The bearing should be replaced with a new one.
Taizhou Benwo Auto Parts Co., Ltd. is a supplier of truck clutch discs, not only truck clutch discs, but also truck pressure plates and other products. Welcome customers at home and abroad to come to discuss cooperation.
English
Arabic
Français
Español
Português
Deutsch
Türkçe
Italiano
Russian
Romaian