Alloy Steel Bar factory Designation by Standards Steel No.DIN 1.274645NiCrMoV16-6 聽 Chemical composition(mass fraction)(wt.%) of the聽1.2746 C(%)Si(%)Mn(%)P(%)S(%)Cr(%)Ni(%)Mo(%)V(%) 0.41-0.490.15-0.350.60-0.80Max 0.025Max 0.0201.40-1.603.80-4.200.73-0.850.45-0.55 Description Special cold work tool steel, air or oil hardenable with highest toughness. Applications Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers, etc.聽 Physical properties (avarage values) at ambient temperature Modulus of elasticity [103聽x N/mm2]: 210聽 Density [g/cm3]: 7.86 Soft Annealing Heat to 610-850鈩? cool slowly in furnace. This will produce a maximum Brinell hardness of 295. Stress Relieving Stress relieving to remove machining stresses should be carried out by heating to approx. 650鈩? holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment. Hardening Harden from a temperature of 880-910鈩?followed by air or oil quenching or warm bath quenching 180-220鈩? Hardness after quenching is 56 HRC. Tempering Tempering temperature: See the data bellow. Tempering Temperature (鈩? vs. Hardness (HRC) 100鈩?/p>200鈩?/p>300鈩?/p>400鈩?/p>500鈩?/p>550鈩?/p> 565452504948 Forging Hot forming temperature: 1100-900鈩?聽Alloy Steel Bar factory website:http://www.htspecialmetals.com/alloy-steel/alloy-steel-bar/