Peristaltic pumps are widely used in industries such as pharmaceuticals, water treatment, chemical processing, and food production due to their ability to handle delicate or corrosive fluids. One of the most important performance characteristics of these pumps is pressure. Understanding how peristaltic pump pressure works is essential for selecting the right pump and ensuring reliable operation.
What is Peristaltic Pump Pressure?
In simple terms, peristaltic pump pressure refers to the maximum discharge pressure the pump can generate to move fluids through the tubing. Unlike centrifugal or diaphragm pumps, peristaltic pumps rely on rollers or shoes that compress flexible tubing, creating a peristaltic motion that pushes fluid forward.
Because there are no valves or seals in direct contact with the liquid, the tubing itself must withstand both suction and discharge pressures. This makes tubing material and wall thickness critical factors in determining pump performance.
Factors Affecting Peristaltic Pump Pressure
-
Tubing Material and Thickness
The choice of tubing—such as silicone, Santoprene, or Tygon—directly influences pressure resistance. Thicker tubing walls can handle higher pressure but may reduce flow rate.
-
Pump Design
Pumps with heavy-duty rollers or shoes can generate higher discharge pressures. Industrial peristaltic pumps are often designed to achieve pressures up to 16 bar (232 psi), while smaller laboratory pumps typically operate below 2 bar (29 psi).
-
Flow Rate
Higher flow rates may reduce maximum achievable pressure, as the tubing and motor must balance between speed and resistance.
-
Temperature
Elevated temperatures can soften tubing materials, lowering their pressure-handling capacity. Selecting heat-resistant tubing is important in such cases.
-
Fluid Properties
Viscosity, density, and abrasiveness of the pumped fluid also affect achievable pressure. More viscous or dense fluids require higher pressure to maintain flow.
Typical Pressure Ranges of Peristaltic Pumps
-
Laboratory Peristaltic Pumps: 0.1–2 bar
-
Industrial Peristaltic Pumps: 2–16 bar
-
High-Performance Pumps: up to 20 bar in specialized applications
Applications Where Pressure Matters
-
Water Treatment: Dosing chemicals such as chlorine requires accurate low-to-medium pressure control.
-
Pharmaceutical Industry: Sterile transfer of sensitive fluids at controlled pressure prevents cell damage.
-
Food & Beverage: Gentle pumping of juices or dairy products requires consistent pressure without contamination.
-
Chemical Processing: Handling corrosive or abrasive fluids under pressure without metal-to-fluid contact.
Conclusion
Peristaltic pump pressure is a crucial parameter that determines both the pump’s efficiency and its suitability for specific applications. By considering tubing material, pump design, and fluid properties, operators can achieve optimal performance and longevity.
Whether you are in pharmaceuticals, food production, or industrial processing, selecting the right peristaltic pump with the proper pressure capacity ensures safe, accurate, and reliable fluid handling.
English
Arabic
Français
Español
Português
Türkçe
Dutch
Italiano
Russian
Romaian