Bending 6061 Aluminum Plate
Is it available to bending 6061 aluminum plate without crack? The solution is sure! Many industries will have bending needs once they carry out secondary processing of aluminum plate. Now not all grades of aluminum plate are suitable for bending. Even supposing this gradeof aluminum plateis appropriate for bending, its different tempers might not be appropriate for bending. Today, wewill speak approximately whether or not 6061 Aluminum Sheet is suitable for bending?
6061 aluminum plate may be bent, however it desires to look what temperit is in. Normally, 6061 aluminum plate in T6 temperand H112 are not appropriate for bending. When bending 90 ranges in these states, it will spoil. How can the 6061 aluminum plate be bent? Bending 6061 aluminum plate have to be operated after annealing and softening. But, the hardness of 6061 aluminum plate can be stepped forward by way of getting old treatment at some stage in bending. But, it must be referred to that deformation will arise in the course of ageing remedy. Manipulate temperature and temperature for the duration of growing old time.6061t6 aluminum plate may be bent, but the hardness in T6 state is higher, and the bending floor of 6061t6 aluminum plate is easy to wrinkle or crack. In contrast, 6061-O country aluminum plate is more suitable for bending. Too thick aluminum plate isn't clean to bend, we recognize it as quickly as we reflect onconsideration on it, try to use a thinner bending 6061 aluminum plate. The larger the bending R attitude, the higher the success charge, so try and growth the bending R angle as a whole lot as feasible. The bending path must be perpendicular to the grain direction of the 6061 aluminum plate, no longer parallel. For aluminum plate components that want to be drawn, it is first-rate to bend and then draw while the manner permits, in any other case the chance of bending and cracking will increase.
Arabic
Français
Español
Português
Deutsch
Türkçe
Dutch
Italiano
Russian
Romaian