MSRM US302 Extender Setup
Configuring your MSRM US302 Extender Setup might not be too difficult. To connect to the WiFi network, simply insert your device into the power outlet. To access the setup page, put "ap.setup" or "192.168.10.1" into your browser's URL bar. Follow the on-screen instructions to configure the extender, which include selecting your current WiFi network and entering the password. Once it's done, utilize the MSRM US302 Extender to get better WiFi connectivity and coverage throughout your home or place of business.
MSRM Extender US302 setup-WPS Guide
-
This is the easiest and takes about 15 seconds. Simply plug the extender into the router's designated spot beforehand.
-
Press the WPS button on the repeater to make it look like two arrows moving in a circle when the power LED becomes static.
-
After a minute or two, observe the lights on both devices blink by pressing the WPS button on the router.
-
After a successful configuration, the router's WPS light will stop flickering and turn solid, turning on the extender simultaneously.
-
To connect your devices to the newly created extender network, go to your WiFi list and use the same password as your router.
Note: Please contact an expert or visit the official website if you need help with your ap setup.
MSRM US302 Wifi Range Extender setup-Manual Guide
-
After connecting, wait for the MSRM US302 Extender to switch on.
-
Connect your device to the WiFi network of the extender.
-
Launch a web browser and go to either 192.168.10.1 or ap.setup.
-
Follow the on-screen directions to manually configure the extender.
-
Once the configuration is complete, benefit from expanded WiFi coverage.
Login Steps MSRM US302 Extender
-
Establish a connection with the MSRM US302 Extender's WiFi network.
-
Type "ap.setup" or "192.168.10.1" into the address bar of a web browser that is open.
-
Enter the username and password.
-
Click "Login" to open the extender's configuration menu.
-
You can now manage your MSRM US302 Extender after logging in.
MSRM US302 WiFi Extender Firmware Update
-
To get to the MSRM US302 Extender's online interface, use an internet browser.
-
From the settings menu, select Firmware Upgrade.
-
Go to the company's website and download the most recent firmware.
-
Uploading the firmware file to the extender will initiate the update.
-
Wait for the update's finish to ensure enhanced efficiency and safety.
MSRM US302 Reset Process
-
Locate the reset key on the MSRM US302 Extender.
-
Press the reset button.
-
Release the button the minute the LED lights start to flash.
-
Wait until the extender restarts and goes back to how it was configured.
-
Set the extender as necessary after the reset.
English
Arabic
Français
Español
Português
Deutsch
Türkçe
Dutch
Italiano
Russian