If you're experiencing issues with your plumbing vents that cannot be fixed with a plunger or drain auger, try these do-it-yourself tips before calling a professional:
Step 1: Inspect Vent Openings
Check the vent openings on your roof for any obstructions. Use caution when climbing onto the roof, especially in good weather conditions.
Step 2: Check for Frost
In cold weather, ice and snow may accumulate in vent pipes, leading to blockages.
Step 3: Clear Obstructions
Carefully remove any obstructions you find in the vents. Use a gentle spray from a garden hose to remove debris and melt frost, avoiding pushing solid blockages further into the vent.
Step 4: Use a Plumbing Auger
If the obstruction is deep inside the vent stack, an auger may help dislodge it. Feed the cable into the vent pipe to remove any debris.
Step 5: Check All Vents
Inspect all vent stacks on your roof to ensure the entire system is functioning correctly.
Step 6: Test with Water
After clearing the vents, run water down a previously problematic drain to confirm the issue is resolved. Proper drainage and the absence of gurgling sounds indicate a successful fix.
Step 7: Perform Regular Maintenance
Make it a habit to routinely check and clean your vent pipes to prevent future issues from occurring. Include this task in your home maintenance routine.
For More information visit https://www.barkleyplumbing.net
4073 Hannegan Rd. Ste. C, Bellingham, WA 98226
English
Arabic
Français
Español
Deutsch
Türkçe
Dutch
Italiano
Russian
Romaian