If you're experiencing issues with your plumbing vents that cannot be fixed with a plunger or drain auger, try these do-it-yourself tips before calling a professional:

Step 1: Inspect Vent Openings

Check the vent openings on your roof for any obstructions. Use caution when climbing onto the roof, especially in good weather conditions.

Step 2: Check for Frost

In cold weather, ice and snow may accumulate in vent pipes, leading to blockages.

Step 3: Clear Obstructions

Carefully remove any obstructions you find in the vents. Use a gentle spray from a garden hose to remove debris and melt frost, avoiding pushing solid blockages further into the vent.

Step 4: Use a Plumbing Auger

If the obstruction is deep inside the vent stack, an auger may help dislodge it. Feed the cable into the vent pipe to remove any debris.

Step 5: Check All Vents

Inspect all vent stacks on your roof to ensure the entire system is functioning correctly.

Step 6: Test with Water

After clearing the vents, run water down a previously problematic drain to confirm the issue is resolved. Proper drainage and the absence of gurgling sounds indicate a successful fix.

Step 7: Perform Regular Maintenance

Make it a habit to routinely check and clean your vent pipes to prevent future issues from occurring. Include this task in your home maintenance routine.

For More information visit https://www.barkleyplumbing.net

4073 Hannegan Rd. Ste. C, Bellingham, WA 98226