Wide Application of Flange Bearings
What is the difference between flange bearings and ordinary bearings? Let's talk about it below. Some ordinary bearings need bearing sleeves to protect the bearings, while flange bearings have flanges on the outside of the bearings, so they are called flange bearings. What problems should be paid attention to during the installation and use of flange bearings, and how to maintain them, we need to study hard.
Bearings with flanges are lubricating greases that have protrusions on one side of the outer ring of the bearing to replace the bearing; note that the connection of the tube should use the principle of thermal expansion and contraction to heat the bearing; connect it to the flange at the rear of the bearing Fix it with screws.
Flange bearings From printers, fax machines to monitors, household goods used in daily life have room for flange bearing products to demonstrate the technology. First, replace the lubricating grease of the bearing, and then note that the pipe connection should use the principle of thermal expansion and contraction, heat the bearing, and then connect it, and fix the flange at the rear of the bearing with screws. The bearing is sleeved on the shaft, there is no relative movement between the inner ring and the shaft, and the outer ring rotates relative to the shaft. Whoever rotates is relative. If the outer ring is fixed, the inner ring and the shaft rotate together; if the inner ring and the shaft are fixed, the outer ring rotates. No matter who rotates, the inner ring and the shaft are theoretically fixed and there is no relative movement. This is an ideal situation. In practice, friction may occur between the inner ring and the shaft if fixing measures such as interference fit are not taken.
NINGBO MOSHENG BEARING CO., LTD. not only has Flanged Ball Bearings but also Steel Ball Bearings and other products. Welcome to visit our official website.
English
Arabic
Français
Español
Português
Türkçe
Dutch
Italiano
Russian
Romaian