WordPress 500 İnternal Server Error Hatası Çözümü

Microsoft states that the new Windows 10 driver system can cause errors. The Driver Verification can sometimes be a bit frustrating for the users, no matter even if it is intended to improve the security of the device.

The recent change that Microsoft has made in its October 2020 Patch Tuesday updates regarding the Windows driver verification process might cause headaches for the users.

There’s a straightforward well-intentioned reason behind this change. This change has been issued because Microsoft doesn’t want to compromise on the Windows 10 systems and intends to prevent hardware drivers that are prone to malware and can get exploited.

No doubt, Microsoft’s all-new driver verification model will help prevent users, but it can cause driver errors in Windows 10 systems. These errors might occur in case if the company fails in verifying the publisher of the driver.

In the current scenario, when the verification process fails, the users can see two driver error messages displayed by Windows 10. They are:

The first error message states: “Windows can’t verify the publisher of this driver software.”

The second message states: “No signature was present in the subject.”

As mentioned above, the error messages signify that Windows, while validating a driver, discovered a catalog file that was improperly formatted, leading to the failure of the installation process.

New Driver System

If Windows fails to verify a driver, Microsoft’s support document will signify that the users: “should contact the driver vendor or device manufacturer (OEM) and ask them for an updated driver to correct the issue.”

This, however, makes sense, but the users using Windows 10 would likely get frustrated. This is because the users, after getting signified by the statement by Microsoft, will have to reach out to a company due to an odd request because of the change made by Microsoft into its operating system.

Luckily these issues will only be experienced by the users when they will be applying the updates to the old driver. Sometimes, when a company releases a new driver with faults, the installation of an older driver is the only fix available for you.

We hope that, over the time, Microsoft will improve its new driver system but, in case you received a driver error message earlier than that, then, in that case, you need to go to a device manufacturer or the driver vendor directly and with the hope that they do have a fix for your issue.

Final Verdict

So, this was all about the details regarding the new Windows 10 driver system update. Even though this update is made to improve the system’s security, Microsoft still warns its users about this from the very beginning.

Source : https://thetrustblog.com/microsoft-warns-about-the-errors-that-might-occur-from-the-new-windows-10-driver-system/

Several computer users complain that they encounter fatal error c0000022 on their device screen when they switch on their computer. If you are also facing this issue on your operating system, then you are at the right place! We will show how you can permanently fix this issue. Check them out below:

Perform System Test through System Diagnostics

Here are the steps to follow:

1. Connect your PC to an external supply and switch off its power. And leave your device plugged during these operations.
2. Tap and hold the power button and when your screen turns on, tap on the “ESC” button.
3. Tap the corresponding button for the “System Diagnostics” button, which is usually F2.
4. Scroll below via arrow buttons to select “System Tests” and then tap the “Enter” button on your keyboard.
5. The test will indicate if there is a hardware issue. You can fix it accordingly.

Use System Restore Feature

Here are the steps to follow:

1. Switch on your device and hit the “ESC” button immediately.
2. Continue tapping the “ESC” button until the “System Diagnostic” menu appears on your screen.
3. In the “System Diagnostics” menu, tap F11, and then click “System Recovery.”
4. Choose your desired language and then tap the “Enter” button on your keyboard.
5. Now move to the “Troubleshoot” and then click “Enter.”
6. Navigate to the “Advanced” option hit “System Restore.” After that, you can see “System Restore Wizard.”
7. Select a restore point that shows this error and then select “Next.”
8. Now tap on the “Finish” button to restore operations.

Uninstall Recent Updates

Here are the steps to follow:

1. Tap the Windows + I button on your keyboard to launch the settings application on your device.
2. Select “Updates and Security.”
3. Click “Updates History.”
4. Select “Uninstall Updates.”
5. You have to find recent updates and then select the “Uninstall” button and tap on it.
6. Now restart your system and then check if the issue has been resolved.

Uninstall Recent Updates via DISM Command

Here are the steps to follow:

1. Tap the Windows + X button on your keyboard to open the taskbar menu.
2. Select “Command Prompt as Admin.”
3. Now you need to type the given command in the search field and tap “Enter” button on your keyboard:
4. DISM.exe /online /get-packages
5. After the above command, you need to find the recent update that you want to uninstall and then copy the name.
6. Now return to the command-line and then enter the given command and hit “Enter” button on your keyboard:
7. DISM.exe /online /remove-package /packagename:[UPDATE NAME]
8. In the above command, you have to replace “UPDATE NAME” with installed Windows updates.
9. Now restart your computer and then check.

Install Necessary Microsoft Security Bulletin Update through Safe Mode

Boot your computer in safe mode

Here are the steps to follow:

1. Attach your PC to an external to power supply and power on your device.
2. Tap and hold the “ESC” button until the “Systems Diagnostic” menu appears on your screen.
3. Tap “F11” to open the “System Recovery” menu.
4. Choose your desired language and then tap the “Enter” button on your keyboard.
5. Select “Troubleshoot” and then the Enter button on your keyboard.
6. Move to the Advanced Options and then click “Startup Settings.”
7. Select “Restart.”
8. On the next page, select the number similar to “Enable Safe Mode with Networking” features.
9. After the above process, your computer will reboot into Safe Mode.

Get Newest Security Bulletin MS16-10

Here are the steps to follow:

1. In the Safe Mode, select the link to get the newest Security Bulletin MS16-10, which is missing from your operating system.
2. Now select the “Microsoft Update Catalog” option under the “How to get this update” location, it is a second method.
3. Tap on the “Download” option for your device specifications.
4. Here you have to wait until the download completes and then go to the location where the file was downloaded.
5. Double-tap on the downloaded file and then install it on your device by following the on-screen instruction.
6. Now you need to restart your computer to check if the issue has been resolved.

Using the above tips and tricks, you can resolve the issue relating to the c0000022 error that may be causing the BSOD error. These solutions work on all devices using Windows.

source: https://walcitybase.com/blog/how-to-fix-fatal-error-c0000022/

Most computer errors are easy to fix and very common, but in some cases, you get a Blue Screen of Death error on your device like “SYSTEM_LICENSE_VIOLATION.” This error is dangerous; it can crash your Windows 10 operating system. and to try fix the issue, you need to restart your operating system. Restarting the PC can fix several issues, but even if after restarting you are still facing this issue, you need to do another troubleshoot. Follow the solutions mentioned below and learn how to fix the system license violation error on your device.

Check Hard Drive

Follow these steps:

1. Enter “Advanced Startup.”
2. Select “Troubleshoot” and then click “Advanced Options.”
3. Click “Command Prompt: that appears in the dropdown list on your screen.
4. When the Command Prompt pops up on your screen, you need to enter the given command and then hit the “Enter” button.
5. bootrec.exe /rebuildbcd
6. Several users also reported that they need to run the “CHKDSK” command to fix this issue. To run this command, you need to know the drive letter of your entire hard drive partitions.
7. In the command-line you need to enter the given command matching with your hard drive partition on your computer:
8. chkdsk /r c
9. chkdsk /r d
10. Reboot the device.

With Windows Installer Media

Follow these steps:

1. First, launch the windows installer media.
2. Right-tap on the start menu and then select “Command Prompt” as Admin.
3. In the run command-line, you need to enter the given command and hit the “Enter” button after that.
4. dism /online /cleanup-image /scanhealth
5. After that, enter this:
6. DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess

Enter Safe Mode

Follow these steps:

1. Start the “Automatic Repair tool while restarting your operating system.
2. Alternatively, you can also tap and hold the “Shift” button and then select the “Restart” option.
3. Select “Troubleshooter” hit “Advanced option” and then click “Startup Settings.”
4. Now select the “Restart” button.
5. After the above process, when your PC boots, click “Safe Mode with Networking,” or select any other version.

Run System Restore Windows 10 Reset

Here are the steps to follow:

1. Start the “Automatic Repair tool while restarting your operating system.
2. Select “Troubleshoot” click “Advanced options” and then select “System Restore.”
3. Now choose your login Id and enter your password and then select “Continue.”
4. Select “Choose a different restore point” and then restore the point that you wish to return to.
5. Select “Next” and then wait until the process completes.

source: https://shoutk.com/system-license-violation-in-windows-10/

Whenever you want to open a program, a configuration screen may launch occasionally. Several Microsoft Office users face issues with the configuration dialog. When they wish to open suite’s application, the error code appears on their screen saying, “Please wait while Windows configures Microsoft Office.” If you still open the app, and the configuration window does not appear on your screen when you launch it,  the app may not open quickly. Read on and learn how to fix the Please Wait While Windows Configures errors.

Steps to Fix Error Please Wait While Windows Configures

Repair Microsoft Office through Control Panel

Repairing corrupted Microsoft Office installation may fix the configuration issue.

To repair Microsoft Office follows the steps given below:

1. Tap the Windows + R button to open Program features.
2. In the Run search field, type “appwiz.cpl” and then hit “OK” to launch the window.
3. Click listed Microsoft Office suite.
4. Tap the “Change” option and click the “Yes” button to confirm.
5. If you are using Microsoft Office 2016, click the “Online Repair” button and then select “Repair.”
6. Now restart your PC and then check for improvements.

Launch Microsoft’s Easy Fix 50780 Tool

Microsoft’s Easy Fix 50780 tool is one of the perfect tools to fix configuration errors. This tool is best for the most recent Microsoft Office Version, but it may help you if you have Microsoft Office 2010. To use this tool first, you need to download it on your device. Then launch the tools to resolve the configuration issue.

Select Windows Search Option

Here are the steps to follow:

1. Launch the Run accessory in your Windows.
2. In the Run search field, type “appwiz.cpl” and then hit the “OK” button.
3. Select “Turn Windows features on or off” to launch the window directory on your screen.
4. Now click the “Windows Search” button when not selected, and then tap “OK.”
5. Now restart your operating system.

Disable Microsoft Office Add Ons

Here are the steps to follow:

1. Launch the Microsoft Office application on your device.
2. Select “File” and then click “Option” to launch the settings features.
3. Click the Add-ins button.
4. Click “COM Add-ins” in the dropdown menu.
5. After that, click on “Go.”
6. Wait for the launch of the COM Add-ins screen.
7. Then deselect entire selected add-ins.
8. Click on the “OK” option located in COM Add-ins.
9. Now close and then reopen MS Office.
10. Your issue should be solved.

source:https://fluidk.com/windows-error-please-wait-while-windows-configures/

If you update your Windows 10 operating system with new updates, you may face issues with launching a specific application. If you cannot start any Windows 10 application, then you are the right place. In this article, we will show you how you can fix this issue.

Ways to Solve Error App Does Not Support the Contract Specified

1) Use Disk Cleanup

Here are the steps to follow:

1. Go to This PC.
2. Right-tap on the primary partition.
3. Select “Properties.”
4. Select “Disk Cleanup” under the Properties dropdown menu.
5. This tool will automatically calculate how much space could free.
6. Then you can select which folder and files you wish to clear and then hit “OK” and wait until the process completes.

2) Perform SFC Scan

Here are the steps to follow:

1. In the search field, you need to type “cmd.”
2. Now a “Command Prompt” will appear on your screen, right-tap on it.
3. Click the “Run as Administrator” button.
4. Select “Yes” when prompted to insert your username and password.
5. In the “Command Prompt” type “sfc /scannow” and then tap on the “Enter” button on your keyboard.
6. Now you have to wait until the System File Checker completes the procedure.

3) Show Hidden Folders and Files

Here are the steps to follow:

1. Tap on the Start button and then select “Folder.”
2. Then click on the “File Explorer” option.
3. Click the “View” button that appears on the upper side of your screen.
4. Find the option “Show hidden files, drivers, and folder” and then tap “Apply.”
5. Click the “OK” button to close the window.
6. Now move to “This PC” double-tap to launch C: partition where the Windows 10 is installed.
7. Tap on the “Program Files” click “Microsoft Applications” folder.
8. Right-tap on this folder; visit the “Properties” button.
9. Click the “Security” tab that appears on the upper side of your screen.
10. Now change “Permission” for this folder to the “Administrator group” and then tap “Apply” and hit “OK.”

4) Uninstall Problematic Application

Here are the steps to follow:

1. Launch the Settings application on your operating system.
2. Select “Application and Features” and find a Problematic application.
3. Click the “respective application” and then select the “Uninstall” button.
4. Now, wait until the process is finished.
5. Visit “Microsoft Store.”
6. Now search the application that you wish to uninstall and then select the “Install” option to reinstall it.
7. Now you need to follow the on-screen instruction to complete the process.

5) Sync Licenses

Here are the steps to follow:

1. Launch the Microsoft Store” select “settings.”
2. Move to the “Application updates” and then click “Sync licenses.”
3. After the above process, you need to close the “Microsoft Store” and then try to launch your application.
4. If the issue still appears, then restart your computer.

6) Update Microsoft store application

• Here are the steps to follow:
• Open Microsoft store application on your device.
• Select the “Settings” option.
• Select “application updates” enable the features that automatically update applications in the Settings feature.
• Tap on the three-dot menu and then click “Download and updates” and hit “update your application.”

7) Clear Store Cache

Here are the steps to follow:

1. Tap on the “Start” button and type “run” in the search field and then tap the ‘Enter” button on your keyboard.
2. In the search field type “WSReset.exe” command.
3. After that, an “empty Command Prompt” window appears on your screen.
4. Now you need to wait until the process is complete.

8) Reset your Computer

Here are the steps to follow:

1. Launch the “settings.”
2. In the settings feature, select “Updates and security.”
3. Move to the “recovery.”
4. Select “Reset this computer” and then select “WSReset.exe.”
5. Now you need to follow the on-screen instructions to complete the process.

source: https://wiredk.com/windowscontract-specified-error/

After updating the windows 10 OS, users may get an error stating “Some settings are managed by your organization” once they try to use the Settings app. This error can also pop-up on other places such as Cortana. To fix this error, read on and apply the solutions mentioned below:

Try to Eliminate Each Unnecessary Browser Extension

Follow the steps mentioned below:

1. You should invoke the Chrome browser on your system.
2. After that, click on the vertical ellipsis menu icon of the screen.
3. Go to the ‘More tools’ option then choose the Extensions option.
4. Now, select the Remove button beside each extension that is shown.

Reset the Google Chrome Browser

Follow the guidelines given below:

1. Navigate to the Menu option and click on the Settings option.
2. Thereafter, move down then select the Advanced button.
3. You should find the tab of ‘Reset and clean up.’
4. Go to the ‘Restore settings to their original defaults’ option and select it.
5. Now, verify with Reset settings.

Remove AppData Contents in the Folder of Chrome

Here is what you need to do:

1. Hit the Windows and E buttons ato invoke the File Explorer.
2. Then go to the pursuing location to reach the folder of Google: ‘C:\\Users\\[username]\\AppData\\Local\\Google’
3. Hold the ‘Ctrl + A’ key together over the keyboard to choose all the items.
4. Later, right-click on it then choose the Delete button.
5. Now, clear the Recycle bin.

Turn off Start Menu and Taskbar Notifications through Group Policy

Follow the steps mentioned here:

1. You should invoke the ‘Local Group Policy Editor’ as an administrator.
2. Then go to the pursuing location User Configuration > Administrative Templates > Start Menu and Taskbar > Notifications.
3. Navigate to the right and twice click on the ‘Turn off toast notifications.’
4. Now, select the option of ‘Disabled’ and choose the Apply then OK buttons.

Set Diagnostic and Usage Data to Full Using Settings

Follow the instructions mentioned below:

1. Go to the Start key and right-click on it, then choose the Settings option.
2. After that, select the Privacy option.
3. You should click on the ‘Diagnostics & Feedback’ option.
4. Then modify the settings and change it from Basic to Full.

Source : “Some settings are managed by your organization”