Moreover, compared with the 5 mm FBG sensor, the 10 mm FBG sensor showed a larger critical detection range for crack damage. Therefore, the spectral area can be used as a reliable damage feature to detect the crack location quantitatively based on the simulated and experimental results.This work is devoted to the study of phase transition processes in nanostructured ceramics of the Y2O3/TiO2-Y2TiO5 type doped with carbon nanotubes as a result of thermal annealing, as well as to the assessment of the prospects of the effect of phase composition on photocatalytic activity. By the method of X-ray phase analysis, it was found that an increase in the annealing temperature leads to the formation of the orthorhombic phase Y2TiO5, as well as structural ordering. Based on the obtained UV spectra, the band gap was calculated, which varies from 2.9 eV (initial sample) to 2.1 eV (annealed at a temperature of 1000 °C). During photocatalytic tests, it was established that the synthesized nanostructured ceramics Y2O3/TiO2-Y2TiO5 doped CNTs show a fairly good photocatalytic activity in the range of 60-90% decomposition of methyl orange.The International Myeloma Working Group (IMWG)recommends FDG PET/CT (Fluoro-Deoxy-glucose Positron Emission Tomography/Computed Tomography) as the gold standard imaging modality for initial evaluation and response to therapy assessment in multiple myeloma. In fact, FDG PET/CT, provides multiple useful indexes to risk-stratify patients and has significant prognostic value. However, multiple myeloma remains a complex disease to interpret on imaging. The Italian myeloma criteria for PET use (IMPeTUs) were proposed to standardize FDG PET/CT reading in multiple myeloma. In this communication an overview on IMPeTUs is provided as well as some examples of application.A simultaneous analytical method for the organophosphorus insecticide fenthion and its five metabolites (fenthion oxon, fenthion oxon sulfoxide, fenthion oxon sulfone, fenthion sulfoxide, and fenthion sulfone) was developed based on ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). https://www.selleckchem.com/products/l-nmma-acetate.html Five matrices (brown rice, chili pepper, orange, potato, and soybean) were selected to validate the method. The target compounds were analyzed using positive electrospray ionization in the multiple reaction monitoring mode. For the best sensitivity in regard to the detector response, water and methanol containing formic acid (0.1%) were selected as the mobile phase. The optimum extraction efficiency was obtained through a citrate-buffered QuEChERS (quick, easy, cheap, effective, rugged, and safe) method. Recovery tests were carried out at three spiking levels (n = 3). At all fortification levels, the accuracy and precision results were between 70% and 120% with a relative standard deviation of ≤15%. The limit of quantitation was 0.01 mg/kg, and the correlation coefficients (r2) of the matrix-matched calibration curves were >0.99. Significant signal suppression in the detector responses were observed for all matrices, suggesting that a compensation method, such as matrix-matched calibration, is required to provide accurate quantitative results. The applicability of the presented method was confirmed for the simultaneous analysis of fenthion and its metabolites in various crops.A fluorescent optical fiber sensor for the detection of mercury (Hg2+) ions in aqueous solutions is presented in this work. The sensor was based on a fluorophore-labeled thymine (T)-rich oligodeoxyribonucleotide (ON) sequence that was directly immobilized onto the tip of a tapered optical fiber. In the presence of mercury ions, the formation of T-Hg2+-T mismatches quenches the fluorescence emission by the labeled fluorophore, which enables the measurement of Hg2+ ions in aqueous solutions. Thus, in contrast to commonly designed sensors, neither a fluorescence quencher nor a complementary ON sequence is required. The sensor presented a response time of 24.8 seconds toward 5 × 10-12 M Hg2+. It also showed both good reversibility (higher than the 95.8%) and selectivity the I0/I variation was 10 times higher for Hg2+ ions than for Mn2+ ions. Other contaminants examined (Co2+, Ag+, Cd2+, Ni2+, Ca2+, Pb2+, Mn2+, Zn2+, Fe3+, and Cu2+) presented an even lower interference. The limit of detection of the sensor was 4.73 × 10-13 M Hg2+ in buffer solution and 9.03 × 10-13 M Hg2+ in ultrapure water, and was also able to detect 5 × 10-12 M Hg2+ in tap water.For the first time, 3D chitin scaffolds from the marine demosponge Aplysina archeri were used for adsorption and immobilization of laccase from Trametes versicolor. The resulting chitin-enzyme biocatalytic systems were applied in the removal of tetracycline. Effective enzyme immobilization was confirmed by scanning electron microscopy. Immobilization yield and kinetic parameters were investigated in detail, in addition to the activity of the enzyme after immobilization. The designed systems were further used for the removal of tetracycline under various process conditions. Optimum process conditions, enabling total removal of tetracycline from solutions at concentrations up to 1 mg/L, were found to be pH 5, temperature between 25 and 35 °C, and 1 h process duration. Due to the protective effect of the chitinous scaffolds and stabilization of the enzyme by multipoint attachment, the storage stability and thermal stability of the immobilized biomolecules were significantly improved as compared to the free enzyme. The produced biocatalytic systems also exhibited good reusability, as after 10 repeated uses they removed over 90% of tetracycline from solution. Finally, the immobilized laccase was used in a packed bed reactor for continuous removal of tetracycline, and enabled the removal of over 80% of the antibiotic after 24 h of continuous use.Non-centrifugal cane sugar (panela) is an unrefined sugar obtained through intense dehydration of sugarcane juice. Browning, antioxidant capacity (measured by ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) assay and total phenolic content) and the formation of acrylamide and other heat-induced compounds such as hydroxymethylfurfural (HMF) and furfural, were evaluated at different stages during the production of block panela. Values ranged between below the limit of quantitation (LOQ)-890 µg/kg, less then LOQ-2.37 mg/kg, less then LOQ-4.5 mg/kg, 0.51-3.6 Abs 420 nm/g, 0.89-4.18 mg gallic acid equivalents (GAE)/g and 5.08-29.70 µmol TE/g, for acrylamide, HMF, furfural, browning, total phenolic content and ABTS (all data in fresh weight), respectively. Acrylamide significantly increased as soluble solid content increased throughout the process. The critical stages for the formation of acrylamide, HMF and furfural were the concentration of the clarified juice in the concentration stage to get the panela honey and the final stage.