Here, it can be summarized that curcumin functionalized by multi-layered polyelectrolyte capsules can be used as a model to study the fate of the adsorbed nanocarriers and to investigate the drug release inside cells.Effects of the eugenol-chitosan nanoemulsion as an edible coating on the quality of hairtail (Trichiurus haumela) during storage at 4 °C were evaluated. For all samples, such parameters as pH, thiobarbituric acid (TBA), total volatile basic nitrogen (TVB-N), water holding capacity (WHC), electrical conductivity (EC), total bacteria count (TVC) and sensory were examined periodically. The results demonstrated that eugenol-chitosan nanoemulsion coating showed better preservative effects than chitosan nanoemulsion alone. Therefore, a coating based on eugenol-chitosan nanoemulsion could be regarded as an effective food-grade biopreservative to maintain the quality of hairtail fish and prolong its shelf life during chilled storage.To improve the controlled release and stability of the loaded drug, the alginate-porous starch solution, as the gel matrix (GM), was prepared and added into curcumin-loaded microemulsion (CUR-ME) in a certain proportion, and then mixed with slow-gelling agents (CaCO3 + d-glucono-δ-lactone) to prepared curcumin-loaded microemulsion gel (CUR-ME-G). With increasing the proportion of GM from 25% (CUR-ME3G1) to 83% (CUR-ME1G5), the drug loading efficiency increased from 24% to 98% and the maximum drug loading capacity (14.9 mg/g) was found in CUR-ME1G3 with 75% GM. Moreover, a denser structure that entrapped all microemulsion droplets was formed with increasing the proportion of microemulsion according to the observation of scanning electron microscopy. This was also confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy that no new peaks appeared in CUR-ME-G, while the hydrogen bonding interactions might exist between curcumin and sodium alginate. The in vitro release of the CUR-ME-G followed diffusion-controlled mechanism that was consistent with the first-order kinetic model. The release rate depended on the components of the CUR-ME-G and the pH value of the release medium. CUR-ME-G with curcumin concentration of 0.20% exhibited the best biological activity. CUR-ME-G might provide a potential application in the smart drug delivery systems.The production of sustainable food packaging from renewable sources represents a prominent alternative to the use of petrochemical-based plastics. For example, starch remains one of the more closely studied replacement options due to its broad availability, low cost and significant advances in improving properties. In this context, essential oils as additives fulfil a key role in the manufacture of renewable active packaging with superior performances. In this review, a comprehensive summary of the impact of adding essential oils to the starch-based films is provided. After a brief introduction to the fundamental concepts related to starch and essential oils, details on the most recent advances in obtaining active starch-based films are presented. Subsequently, the effects of essential oils addition on the structure-property relationships (from physicochemical to antimicrobial ones) are thoroughly addressed. Finally, applications and challenges to the widespread use of essential oils are critically discussed.Biomineralization inspired process to produce polymer of desired need is a promising approach in the field of research. In the present work, the bacterial cellulose (**) based nanocomposites with a 3D network were synthesized via a biological route by choosing the calcium salt of primary metabolites (calcium gluconate) as the carbon source. The ** based composites were characterized by employing with Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). During the preparation of nanocomposites, the calcium ions embedded on the cellulose fibrils were served as the nucleation center and calcium carbonate was deposited into ** network in the assistance of CO2. The uniform distribution of embedded objects on the cellulose nanofibers between internal and external was achieved. The exploitation of organisms for inorganic growth, shape and self-assembling explores new opportunities to the design of original nanostructures.Glioblastoma (GBM) is the most common and lethal brain tumor with high inflammation. GBM cells infiltrate microglia and macrophages and are surrounded by pro-inflammatory cytokines. Interleukin (IL)-1β, which is abundantly expressed in the tumor microenvironment, is involved in tumor progression. Intercellular adhesion molecule (ICAM)-1 and vascular cell adhesion molecule (VCAM)-1 mediate cell-cell interactions, and these cell adhesion molecules (CAMs) can be regulated by cytokines in immune cells or cancer cells in the inflammatory tumor microenvironment. In this study, we found that ICAM-1 and VCAM-1 expression was induced when GBM cells were treated with IL-1β, and that adhesive interaction between monocytes and GBM cells increased accordingly. The levels of soluble CAMs (sICAM-1 and sVCAM-1) were also increased in the supernatants induced by IL-1β. Furthermore, the conditioned media contained sICAM-1 and sVCAM-1, which further promoted IL-6 and CCL2 expression in differentiated macrophages. IL-1β downregulated Src homology 1 domain-containing protein tyrosine phosphatase (SHP-1) in GBM. The expression of ICAM-1 and VCAM-1 was regulated by p38, AKT, and NF-κB signaling pathways, which were modulated by SHP-1 signaling. The present study suggests that IL-1β-induced protein expression of ICAM-1 and VCAM-1 in GBM may modulate the adhesive interaction between GBM and monocytes. In addition, IL-1β also induced the soluble form of ICAM-1 and VCAM-1 in GBM, which plays a key role in the regulation of tumor-associated monocyte/macrophage polarization.4-Amino-2-Trifluoromethyl-Phenyl Retinate (ATPR), a novel all-trans retinoic acid (ATRA) derivative, has been demonstrated that it had a variety of anti-tumor effects by exerting regulation on cellular proliferation, apoptosis and differentiation. Here, we found that ATPR is critical for alleviating myelodysplastic syndrome (MDS) and acute myelogenous leukemia. USO1, vesicle transport factor, belongs to tether protein family and involved in endoplasmic reticulum to Golgi trafficking of protein which is important to tumorigenesis. https://www.selleckchem.com/products/fino2.html How USO1 contribute to MDS remain elusive. USO1 is aberrantly activated in MDS and AML in vivo and vitro, aberration of which might be a dominant mechanism for MDS cell survival. During the ATPR-induced remission of MDS, in vitro, USO1 presents a time and concentration-dependent decrease. Silencing of USO1 promotes myeloid differentiation of MDS cells and inhibits MDS cellular proliferation while USO1 over-expression has the opposite effect, suggesting that reduction of USO1 enhances the sensitivity of SKM-1 cells to ATPR treatment.
Here, it can be summarized that curcumin functionalized by multi-layered polyelectrolyte capsules can be used as a model to study the fate of the adsorbed nanocarriers and to investigate the drug release inside cells.Effects of the eugenol-chitosan nanoemulsion as an edible coating on the quality of hairtail (Trichiurus haumela) during storage at 4 °C were evaluated. For all samples, such parameters as pH, thiobarbituric acid (TBA), total volatile basic nitrogen (TVB-N), water holding capacity (WHC), electrical conductivity (EC), total bacteria count (TVC) and sensory were examined periodically. The results demonstrated that eugenol-chitosan nanoemulsion coating showed better preservative effects than chitosan nanoemulsion alone. Therefore, a coating based on eugenol-chitosan nanoemulsion could be regarded as an effective food-grade biopreservative to maintain the quality of hairtail fish and prolong its shelf life during chilled storage.To improve the controlled release and stability of the loaded drug, the alginate-porous starch solution, as the gel matrix (GM), was prepared and added into curcumin-loaded microemulsion (CUR-ME) in a certain proportion, and then mixed with slow-gelling agents (CaCO3 + d-glucono-δ-lactone) to prepared curcumin-loaded microemulsion gel (CUR-ME-G). With increasing the proportion of GM from 25% (CUR-ME3G1) to 83% (CUR-ME1G5), the drug loading efficiency increased from 24% to 98% and the maximum drug loading capacity (14.9 mg/g) was found in CUR-ME1G3 with 75% GM. Moreover, a denser structure that entrapped all microemulsion droplets was formed with increasing the proportion of microemulsion according to the observation of scanning electron microscopy. This was also confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy that no new peaks appeared in CUR-ME-G, while the hydrogen bonding interactions might exist between curcumin and sodium alginate. The in vitro release of the CUR-ME-G followed diffusion-controlled mechanism that was consistent with the first-order kinetic model. The release rate depended on the components of the CUR-ME-G and the pH value of the release medium. CUR-ME-G with curcumin concentration of 0.20% exhibited the best biological activity. CUR-ME-G might provide a potential application in the smart drug delivery systems.The production of sustainable food packaging from renewable sources represents a prominent alternative to the use of petrochemical-based plastics. For example, starch remains one of the more closely studied replacement options due to its broad availability, low cost and significant advances in improving properties. In this context, essential oils as additives fulfil a key role in the manufacture of renewable active packaging with superior performances. In this review, a comprehensive summary of the impact of adding essential oils to the starch-based films is provided. After a brief introduction to the fundamental concepts related to starch and essential oils, details on the most recent advances in obtaining active starch-based films are presented. Subsequently, the effects of essential oils addition on the structure-property relationships (from physicochemical to antimicrobial ones) are thoroughly addressed. Finally, applications and challenges to the widespread use of essential oils are critically discussed.Biomineralization inspired process to produce polymer of desired need is a promising approach in the field of research. In the present work, the bacterial cellulose (BC) based nanocomposites with a 3D network were synthesized via a biological route by choosing the calcium salt of primary metabolites (calcium gluconate) as the carbon source. The BC based composites were characterized by employing with Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). During the preparation of nanocomposites, the calcium ions embedded on the cellulose fibrils were served as the nucleation center and calcium carbonate was deposited into BC network in the assistance of CO2. The uniform distribution of embedded objects on the cellulose nanofibers between internal and external was achieved. The exploitation of organisms for inorganic growth, shape and self-assembling explores new opportunities to the design of original nanostructures.Glioblastoma (GBM) is the most common and lethal brain tumor with high inflammation. GBM cells infiltrate microglia and macrophages and are surrounded by pro-inflammatory cytokines. Interleukin (IL)-1β, which is abundantly expressed in the tumor microenvironment, is involved in tumor progression. Intercellular adhesion molecule (ICAM)-1 and vascular cell adhesion molecule (VCAM)-1 mediate cell-cell interactions, and these cell adhesion molecules (CAMs) can be regulated by cytokines in immune cells or cancer cells in the inflammatory tumor microenvironment. In this study, we found that ICAM-1 and VCAM-1 expression was induced when GBM cells were treated with IL-1β, and that adhesive interaction between monocytes and GBM cells increased accordingly. The levels of soluble CAMs (sICAM-1 and sVCAM-1) were also increased in the supernatants induced by IL-1β. Furthermore, the conditioned media contained sICAM-1 and sVCAM-1, which further promoted IL-6 and CCL2 expression in differentiated macrophages. IL-1β downregulated Src homology 1 domain-containing protein tyrosine phosphatase (SHP-1) in GBM. The expression of ICAM-1 and VCAM-1 was regulated by p38, AKT, and NF-κB signaling pathways, which were modulated by SHP-1 signaling. The present study suggests that IL-1β-induced protein expression of ICAM-1 and VCAM-1 in GBM may modulate the adhesive interaction between GBM and monocytes. In addition, IL-1β also induced the soluble form of ICAM-1 and VCAM-1 in GBM, which plays a key role in the regulation of tumor-associated monocyte/macrophage polarization.4-Amino-2-Trifluoromethyl-Phenyl Retinate (ATPR), a novel all-trans retinoic acid (ATRA) derivative, has been demonstrated that it had a variety of anti-tumor effects by exerting regulation on cellular proliferation, apoptosis and differentiation. Here, we found that ATPR is critical for alleviating myelodysplastic syndrome (MDS) and acute myelogenous leukemia. USO1, vesicle transport factor, belongs to tether protein family and involved in endoplasmic reticulum to Golgi trafficking of protein which is important to tumorigenesis. https://www.selleckchem.com/products/fino2.html How USO1 contribute to MDS remain elusive. USO1 is aberrantly activated in MDS and AML in vivo and vitro, aberration of which might be a dominant mechanism for MDS cell survival. During the ATPR-induced remission of MDS, in vitro, USO1 presents a time and concentration-dependent decrease. Silencing of USO1 promotes myeloid differentiation of MDS cells and inhibits MDS cellular proliferation while USO1 over-expression has the opposite effect, suggesting that reduction of USO1 enhances the sensitivity of SKM-1 cells to ATPR treatment.
0 Comments 0 Shares 300 Views 0 Reviews
Sponsored