This article critically discusses the advantages and disadvantages of electrochemical-related graphene, outlines future challenges, and provides insightful views and references for other researchers.Solar assisted heat pump (SAHP) systems aim to increase the performance of heat pumps by supporting with solar energy using various heating modes, whose performances depend on ambient conditions. In the literature, SAHP systems are classified by structure types, and the heating mode options are not considered as the main priority of the design but a result of the structure of the system. This paper aimed to investigate the effect of ambient conditions on heating modes, and identify the preferable ambient condition ranges for each SAHP system depends on their heating modes, by using a narrative review of 47 recent studies, that shed light on the problem. For this purpose, direct solar heating (DSH), air source heat pump (ASHP), solar source heat pump (SSHP) and solar-air source heat pump (S/ASHP) modes were stated as the basic heating modes of SAHP systems. In accordance with the literature, SAHP systems were classified as direct expansion solar assisted heat pump (DX-SAHP) and series, parallel and dual source indirect expansion solar assisted heat pumps (IDX-SAHP). Solar irradiation, ambient temperature, relative humidity and wind speed has been taken as major ambient conditions to investigate. Reviewed studies indicated that, parallel and series IDX-SAHP are preferable in high solar irradiations about 800 W/m2 with their DSH mode options. Frosting on evaporator is prevented in DX-SAHP with its S/ASHP mode, and even in the presence of frosting, unlike IDX-SAHPs ASHP mode, freezing is a factor that improves performance on flat evaporator in cold and humid conditions. https://www.selleckchem.com/products/2-c-methylcytidine.html This study indicates that there are obscure areas for future studies to focus on for a better comparison between SAHP types. Moreover, proposed novel designs of this paper, such as solar preheating of air in IDX-SAHP systems to add S/ASHP mode as an option, might enhance the performance and applicability of SAHP systems.In this study, MnFe2O4 supported activated carbon magnetic adsorbent (MnFe2O4@AC) was successfully prepared by a simple one-pot solvothermal method and used for the adsorption and removal of acetochlor from aqueous media. Results showed that MnFe2O4@AC with a MnFe2O4/AC mass ratio of 12 was characterized by good magnetism and high acetochlor adsorption capacity over a wide ranging pH, ionic strength, and humic acid concentration in an aqueous solution. Acetochlor was adsorbed on MnFe2O4@AC mainly by hydrogen bonding, π-π interactions, and pore-filling via film, intraparticle, and pore diffusion steps. Adsorption reaction generally approached an equilibrium after 10 h, with the adsorption capacity being ca. 226 mg g-1 for 0.2 g L-1 adsorbent at 25 °C. Adsorbate (acetochlor) degradation and adsorbent regeneration were simultaneously achieved through heat-activated peroxymonosulfate (PMS) oxidation catalyzed by MnFe2O4 on the AC surface with >90% degradation efficiency at ≥9.6 mM PMS concentration at 70 °C within 12 h. However, the adsorption capacity of the regenerated adsorbent decreased by 50% of its original capacity. This needs to be addressed in future studies. MnFe2O4@AC adsorbent has the advantages of high adsorption capacity, good magnetism, and catalyzation, which are promising for adsorption, separation, and degradation for the effective removal and treatment of acetochlor as well as other organic contaminants in different types of waters.Forests are important compartments influencing the environmental fate of persistent organic pollutants (POPs). To illustrate the effect of forests on the regional cycle of POPs, a level IV fugacity fate and transport model coupled with a detailed dynamic-forest module was applied to simulate the long-term variations of PCB-153 in China, where forest coverage accounts for approximately one fifth of land area. In the scenarios with forests, atmospheric outflow from China was 69% of that in the scenario without forests due to the enhanced storage in soil, degradation, and leaching. Previous studies regarded high-latitude areas, such as the polar region and boreal forests, as environments capable of reducing mobility of PCB-153, and they act as sinks of POPs. This modeling result suggests that tropical and subtropical forests may also play a similar role despite high temperatures favoring volatilization. Unlike boreal forest, the low-latitude forests may reduce the overall lifetime of PCB-153 in China due to enhanced degradation in warmer and moist soils of the tropical and subtropical area. Given that approximately half of the global forests are located in tropical and subtropical regions, they can be important environments influencing the global geochemical cycle and distribution of POPs, hence deserving more scientific attention by modeling and empirical studies.Silicon, in its nanoscale form, has shown plant-promoting and insecticidal properties. To date, however, we lack mechanistic evidence for how nanoscale silicon influences the regulation of plant chemical defenses against herbivore attacks. To address this gap, we compared the effect of Si nanodots (NDs) and sodium silicate, a conventional silicate fertilizer, on maize (Zea mays L.) chemical defenses against the oriental armyworm (Mythimna separata, Walker) caterpillars. We found that Si NDs and sodium silicate additions, at the dose of 50 mg/L, significantly inhibited the growth of caterpillars by 53.5% and 34.2%, respectively. This increased plant resistance was associated with a 44.2% increase in the production of chlorogenic acid, as well as the expression of PAL, C4H, 4CL, C3H and HCT, core genes involved in the biosynthesis of chlorogenic acid, by 1.7, 2.4, 1.9, 1.8 and 4.5 folds, respectively. Particularly, in the presence of M. separata, physiological changes in maize plants treated with 50 mg/L Si NDs, including changes in shoot biomass, leaf nutrients (e.g., K, P, Si), and chemical defense compounds (e.g., chlorogenic acid, total phenolics), were higher than those of plants added with equivalent concentrations of conventional silicate fertilizer. Taken together, our findings indicate that Si, in nanoscale form, could replace synthetic pesticides, and be implemented for a more effective and ecologically-sound management of insect pests in maize crop farming.
This article critically discusses the advantages and disadvantages of electrochemical-related graphene, outlines future challenges, and provides insightful views and references for other researchers.Solar assisted heat pump (SAHP) systems aim to increase the performance of heat pumps by supporting with solar energy using various heating modes, whose performances depend on ambient conditions. In the literature, SAHP systems are classified by structure types, and the heating mode options are not considered as the main priority of the design but a result of the structure of the system. This paper aimed to investigate the effect of ambient conditions on heating modes, and identify the preferable ambient condition ranges for each SAHP system depends on their heating modes, by using a narrative review of 47 recent studies, that shed light on the problem. For this purpose, direct solar heating (DSH), air source heat pump (ASHP), solar source heat pump (SSHP) and solar-air source heat pump (S/ASHP) modes were stated as the basic heating modes of SAHP systems. In accordance with the literature, SAHP systems were classified as direct expansion solar assisted heat pump (DX-SAHP) and series, parallel and dual source indirect expansion solar assisted heat pumps (IDX-SAHP). Solar irradiation, ambient temperature, relative humidity and wind speed has been taken as major ambient conditions to investigate. Reviewed studies indicated that, parallel and series IDX-SAHP are preferable in high solar irradiations about 800 W/m2 with their DSH mode options. Frosting on evaporator is prevented in DX-SAHP with its S/ASHP mode, and even in the presence of frosting, unlike IDX-SAHPs ASHP mode, freezing is a factor that improves performance on flat evaporator in cold and humid conditions. https://www.selleckchem.com/products/2-c-methylcytidine.html This study indicates that there are obscure areas for future studies to focus on for a better comparison between SAHP types. Moreover, proposed novel designs of this paper, such as solar preheating of air in IDX-SAHP systems to add S/ASHP mode as an option, might enhance the performance and applicability of SAHP systems.In this study, MnFe2O4 supported activated carbon magnetic adsorbent (MnFe2O4@AC) was successfully prepared by a simple one-pot solvothermal method and used for the adsorption and removal of acetochlor from aqueous media. Results showed that MnFe2O4@AC with a MnFe2O4/AC mass ratio of 12 was characterized by good magnetism and high acetochlor adsorption capacity over a wide ranging pH, ionic strength, and humic acid concentration in an aqueous solution. Acetochlor was adsorbed on MnFe2O4@AC mainly by hydrogen bonding, π-π interactions, and pore-filling via film, intraparticle, and pore diffusion steps. Adsorption reaction generally approached an equilibrium after 10 h, with the adsorption capacity being ca. 226 mg g-1 for 0.2 g L-1 adsorbent at 25 °C. Adsorbate (acetochlor) degradation and adsorbent regeneration were simultaneously achieved through heat-activated peroxymonosulfate (PMS) oxidation catalyzed by MnFe2O4 on the AC surface with >90% degradation efficiency at ≥9.6 mM PMS concentration at 70 °C within 12 h. However, the adsorption capacity of the regenerated adsorbent decreased by 50% of its original capacity. This needs to be addressed in future studies. MnFe2O4@AC adsorbent has the advantages of high adsorption capacity, good magnetism, and catalyzation, which are promising for adsorption, separation, and degradation for the effective removal and treatment of acetochlor as well as other organic contaminants in different types of waters.Forests are important compartments influencing the environmental fate of persistent organic pollutants (POPs). To illustrate the effect of forests on the regional cycle of POPs, a level IV fugacity fate and transport model coupled with a detailed dynamic-forest module was applied to simulate the long-term variations of PCB-153 in China, where forest coverage accounts for approximately one fifth of land area. In the scenarios with forests, atmospheric outflow from China was 69% of that in the scenario without forests due to the enhanced storage in soil, degradation, and leaching. Previous studies regarded high-latitude areas, such as the polar region and boreal forests, as environments capable of reducing mobility of PCB-153, and they act as sinks of POPs. This modeling result suggests that tropical and subtropical forests may also play a similar role despite high temperatures favoring volatilization. Unlike boreal forest, the low-latitude forests may reduce the overall lifetime of PCB-153 in China due to enhanced degradation in warmer and moist soils of the tropical and subtropical area. Given that approximately half of the global forests are located in tropical and subtropical regions, they can be important environments influencing the global geochemical cycle and distribution of POPs, hence deserving more scientific attention by modeling and empirical studies.Silicon, in its nanoscale form, has shown plant-promoting and insecticidal properties. To date, however, we lack mechanistic evidence for how nanoscale silicon influences the regulation of plant chemical defenses against herbivore attacks. To address this gap, we compared the effect of Si nanodots (NDs) and sodium silicate, a conventional silicate fertilizer, on maize (Zea mays L.) chemical defenses against the oriental armyworm (Mythimna separata, Walker) caterpillars. We found that Si NDs and sodium silicate additions, at the dose of 50 mg/L, significantly inhibited the growth of caterpillars by 53.5% and 34.2%, respectively. This increased plant resistance was associated with a 44.2% increase in the production of chlorogenic acid, as well as the expression of PAL, C4H, 4CL, C3H and HCT, core genes involved in the biosynthesis of chlorogenic acid, by 1.7, 2.4, 1.9, 1.8 and 4.5 folds, respectively. Particularly, in the presence of M. separata, physiological changes in maize plants treated with 50 mg/L Si NDs, including changes in shoot biomass, leaf nutrients (e.g., K, P, Si), and chemical defense compounds (e.g., chlorogenic acid, total phenolics), were higher than those of plants added with equivalent concentrations of conventional silicate fertilizer. Taken together, our findings indicate that Si, in nanoscale form, could replace synthetic pesticides, and be implemented for a more effective and ecologically-sound management of insect pests in maize crop farming.
0 Commenti 0 condivisioni 32 Views 0 Anteprima
Sponsorizzato