Highly polarizable mixed-anion structural building units (SBUs) have been demonstrated as promising candidates for high-performing optical crystals. In this work, two new mixed-anion SBUs of [GeOSe3] and [GeO3S] are first designed through partial isovalent substitution of chalcogen atoms by O atoms in the classical [GeQ4] (Q = S, Se) tetrahedra. On the basis of these SBUs, two new quaternary oxychalcogenides, Sr3Ge2O4Se3 and SrGe2O3S2, are successfully synthesized. Sr3Ge2O4Se3 crystallizes in the noncentrosymmetric space group R3m and possesses unique zero-dimensional [Ge2O4Se3]6- units consisting of highly distorted [GeOSe3] tetrahedra and [GeO4] tetrahedra through a shared O atom. It displays intriguing potential as an infrared nonlinear optical material with a wide band gap (2.96 eV) and moderate second harmonic generation intensity (0.8 × AgGaS2). SrGe2O3S2 belongs to the centrosymmetric space group P21/c and features 2∞[Ge2O3S2]2- layers formed by the corner-shared [GeO3S] tetrahedra. Moreover, the large birefringence of SrGe2O3S2 (calculated Δn = 0.22-0.17 from 0.4 to 4.0 μm) gives it a potential as a birefringent material. Theoretical calculations revealed the crucial effects of mixed-anion [GeOSe3] and [GeO3S] units on the moderate second harmonic generation response and large birefringence. The discovery of new mixed-anion SBUs of [GeOSe3] and [GeO3S] will guide the exploration of new functional oxychalcogenides.p-Type and n-type thermoelectric semiconductor materials with compatible performance are key components for thermoelectric devices. Great improvement in thermoelectric performance has been achieved in p-type PbTe, whereas the n-type counterpart still shows much inferior thermoelectric performance compared to that of the p-type PbTe. This inspires many strategies focused on advancing n-type PbTe thermoelectrics. Herein, not only effective mass engineering, resonance states, point defects, and nanostructures but also newly developed concepts including dynamic doping for stabilizing the optimal carrier concentration and introducing dislocations for reducing lattice thermal conductivity are summarized. In addition, the synergistic effects for further enhancing the thermoelectric performance are outlined, together with a discussion and outlook for boosting the advancement in n-type PbTe thermoelectric materials. Strategies discussed here are expected to be applicable to other thermoelectric materials.Hydrogen peroxide (H2O2) is an effective green oxidant, which has been widely applied for environmental remediation. Here, we prepared a novel aluminum-graphite (Al-Gr) composite, which was capable of high-efficient production of H2O2 through selective O2 reduction via a two-electron pathway. We discovered the production of H2O2 at a wide pH range, which could be enhanced by optimizing Al-Gr synthesis conditions. Poly(ethylene glycol) (PEG) addition could promote the formation of a welding interface and porous structure between Al and Gr in the Al-Gr composite, which enhanced the galvanic corrosion of Al0, the selectivity of oxygen reduction via the two-electron pathway, and the mass transfer of O2 in the Al-Gr/O2 system. The formation of Al4C3 could be regulated by sintering temperature and sintering time, which could promote the intergranular corrosion of Al0 and enhance the mass transfer of O2 by reaction with water to generate the porous structure in the Al-Gr composite. The concentration of H2O2 reached 777.5 mg/L at an initial pH of 9.0, an Al-Gr dosage of 8 g/L, and an O2 gas flow rate of 400 mL/min. The possible mechanisms of Al-Gr synthesis and H2O2 production in the Al-Gr/O2 system were proposed. The Al-Gr composite was effective for the in situ production of H2O2, which could be further decomposed into a hydroxyl radical (•OH) by Al0 in the Al-Gr composite. This composite could be used not only to decolorize the Rhodamine B dye but also to degrade various organic contaminants in different water matrices, indicating its environmental significance.A BF3·OEt2 catalyzed intramolecular Povarov reaction was used to synthesize 15 chromenopyridine fused thiazolino-2-pyridone peptidomimetics. #link# The reaction works with several O-alkylated salicylaldehydes and amino functionalized thiazolino-2-pyridones, to generate polyheterocycles with diverse substitution. The synthesized compounds were screened for their ability to bind α-synuclein and amyloid β fibrils in vitro. Analogues substituted with a nitro group bind to mature amyloid fibrils, and the activity moreover depends on the positioning of this functional group.In the human body, highly organized tissues rely on the compartmentalization effect of basement membranes (BMs) that separate different types of cells. We recently reported an artificial basement membrane (A-BM) composed of type-IV collagen and laminin (Col-IV/LM), which are the main components of natural BMs, for cell compartmentalization in three-dimensional (3D) tissues. However, such compartmentalized structures can be maintained only for 3 days, probably due to the degradation issues. In this study, a robust A-BM was fabricated by in situ cross-linking the Col-IV/LM layer-by-layer (LbL) nanofilms in 3D tissues by transglutaminase. The effects of molecular size and configuration on the permeability of obtained A-BMs were comprehensively studied using polystyrene nanoparticles (PS NPs) and dextran with various hydrodynamic diameters, as well as albumin. The findings agreed well with the known size-selective behavior of the glomerular basement membrane. Cross-linked Col-IV/LM nanofilms demonstrate improved stability and a more powerful barrier effect to maintain cell compartmentalization for organized 3D tissues. This in vitro A-BM exhibit great potentials for the design of more complex compartmentalized 3D tissues, for understanding the unique cell-cell cross talk through BMs, and for providing a more reliable 3D tissue model for new drug screening and other in vitro physiological studies.Simultaneous achievement of both high electroluminescence efficiency and high operational stability in organic light-emitting diodes (OLEDs) is required for their use in various practical applications. Although OLEDs based on thermally activated delayed fluorescence-assisted fluorescence (TAF) are considered to possess a promising device architecture to exploit the full potential of OLEDs, the operational stability of such systems still requires further improvement. In this study, a quaternary emission layer consisting of a combination of TAF and mixed-host systems is developed. https://www.selleckchem.com/products/arv-771.html containing this emission layer show improved operational stability through the management of exciton generation processes while maintaining high electroluminescence efficiency. Furthermore, a gradient of the mixed ratio of the co-host matrix is used to optimize the recombination zone profile in the emission layer, leading to 17 times improvement of the operational lifetime compared with that of the corresponding single-host-based device.