Correction for 'Towards accurate and precise positions of hydrogen atoms bonded to heavy metal atoms' by Magdalena Woińska et al., Chem. Commun., 2021, 57, 3652-3655, DOI 10.1039/D0CC07661A.The structure of colloidal particles is one of the factors that significantly affect their properties. Asymmetrical spherical particles with pit structures were prepared by using NH4F to perform wet chemical etching on the designated positions of the partially masked particles. The depth and effectiveness of the pits were adjusted by varying the etching time. By changing the properties of the oil mixture, the oil repellency and foaming ability of the etched particles were characterized and compared. By controlling the wet etching time, the effective pit structures were etched on the particles. Within 10 d of being etched, the particles with pit geometry showed better foam properties than the original unetched particles. The pit structure on the particles improves the oil repellency of the particles in a series of oil mixtures with relatively lower surface tension. https://www.selleckchem.com/products/Bleomycin-sulfate.html No significant difference was observed between the under-etched (18 h) particles and the non-etched particles. The ineffective geometry of the over-etched (15 d) particles results in insufficient robustness of the Cassie-Baxter state of the particles and reduces the volume of the generated foam.We report herein the synthesis, structural characterization and electrocatalytic properties of three new coordination polymers, resulting from the combination of divalent metal (Ca2+, Cd2+ or Co2+) salts with (2-carboxyethyl)(phenyl)phosphinic acid. In addition to the usual hydrothermal procedure, the Co2+ derivative could also be prepared by microwave-assisted synthesis, in much shorter times. The crystal structures were solved by ab initio calculations, from powder diffraction data. Compounds MII[O2P(CH2CH2COOH)(C6H5)]2 M = Cd (1) or Ca (2) crystallize in the monoclinic system and display a layered topology, with the phenyl groups pointing toward the interlayer space in a interdigitated fashion. Compound Co2[(O2P(CH2CH2COO)(C6H5)(H2O)]2·2H2O (3) presents a 1D structure composed of zig-zag chains, formed by edge-sharing cobalt octahedra, with the phenyl groups pointing outside. Packing of these chains is favored by hydrogen bond interactions via lattice water molecules. In addition, H-bonds along the chains are established with the participation of the water molecules and the hydrophilic groups from the ligand. However, the solid exhibits a low proton conductivity, attributed to the isolation of the hydrophilic regions caused by the arrangement of hydrophobic phenyl groups. Preliminary studies on the electrocatalytic performance for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) have been conducted for compound 3 and its pyrolytic derivatives, which were previously thoroughly characterized. By comparison, another Co2+ phosphinate, 4, obtained by microwave-assisted synthesis, but with distinct stoichiometry and a known structure was also tested. For the OER, the best performance was achieved with a derivative of 3, prepared by heating this compound in N2 at 200 °C. This derivative showed overpotential (339 mV, at a current density of 10 mA cm-2) and Tafel slope (51.7 mV dec-1) values comparable to those of other Co2+ related materials.We measured and computed the rate constants of the reaction between the α-hydroxyethyl radical (˙CH(CH3)OH) and bromoacetate (BrCH2CO2-) in the non-buffered (NB), as well as in the bicarbonate (HCO3-) and hydrogen phosphate (HPO42-) buffered aqueous solutions in the presence of ethanol. These complex multistep reactions are initiated by the proton-coupled electron transfer (PCET) which reduces BrCH2CO2- and incites its debromination. The PCET is followed by the step in which the resulting carboxymethyl radical propagates a radical chain reaction thus recovering ˙CH(CH3)OH and enhancing the debromination yields. It is found that the rate constants for the initial PCET step (k1) are raised by ca. an order of magnitude in the presence of the buffers (k1(NB) = 1.4 × 105 dm3 mol-1 s-1; k1(HCO3-) = 1.4 × 106 dm3 mol-1 s-1; k1(HPO42-) = 1.1 × 106 dm3 mol-1 s-1). To rationalize this, we used density functional theory at the M06-2X-D3/6-311+G(2d,p) level in conjunction with the polarizable continuum model (PCM) for an implicit description of the aqueous environment. To acceptably reproduce the measured rate constants, the minimal solute, consisting of ˙CH(CH3)OH, BrCH2CO2- and the buffer anion, has to be expanded by at least 2-3 explicit molecules of the water solvent. The used kinetic model consisting of a set of coupled differential equations indicates the sigmoid dependence of yields vs. k1 thereby confirming the autocatalytic trait of these reactions. The computations unravel the profound influence of the presence of buffers on these reaction systems. On the one hand, the buffer anions promote the PCET by accelerating the proton transfer; on the other hand, they slow down the propagation step by forming the strong hydrogen bonds with the carboxymethyl radical. The two opposing effects cancel out and cause the Br- yields to remain approximately comparable in the non-buffered and buffered media.The treatment of propargylic azides with silver(i) fluoride in acetonitrile was found to yield α-fluorinated NH-1,2,3-triazoles via the Banert cascade. The reaction was regioselective and the products result from an initial [3,3] rearrangement. The reaction is demonstrated on >15 examples with yields ranging from 37% to 86%.The interplay between curvature, confinement and ordering on curved manifolds, with anisotropic interactions between building blocks, takes a central role in many fields of physics. In this paper, we investigate the effects of lattice symmetry and local positional order on orientational ordering in systems of long-range interacting point quadrupoles on a sphere in the zero temperature limit. Locally triangular spherical lattices show long-range ordered quadrupolar configurations only for specific symmetric lattices as strong geometric frustration prevents general global ordering. Conversely, the ground states on Caspar-Klug lattices are more diverse, with many different symmetries depending on the position of quadrupoles within the fundamental domain. We also show that by constraining the quadrupole tilts with respect to the surface normal, which models interactions with the substrate, and by considering general quadrupole tensors, we can manipulate the ground state configuration symmetry.