Biochar prepared by co-pyrolysis of nano-zero-valent iron and sewage sludge (nZVISB) was used to remove As(Ⅴ) from aqueous solution. When the initial pH was 2, the initial As(Ⅴ) concentration was 20 mg L-1, the dose of nZVISB was 10 g L-1, the contact time was 24 h, and the adsorption temperature was 298K, the removal efficiency of As(Ⅴ) was greater than 99%. The isothermal removal of As(Ⅴ) followed the Freundlich model better, and the maximum adsorption capacity of As(Ⅴ) was 60.61 mg g-1. The removal process of As(Ⅴ) could be better described by pseudo-second-order kinetic model, and the rate-controlling step should be liquid film diffusion and chemical reaction. Thermodynamic analysis indicated that the removal of As(Ⅴ) was a spontaneous and endothermic process dominated by chemical adsorption. The characterizations of nZVISB before/after adsorption and the solution after adsorption suggested that the iron-containing substances (Fe0, Fe2+, FeOOH) and organics in the nZVISB had a great effect on the removal of As(Ⅴ), and the As was mainly immobilized on nZVISB by speciation of As-O-Fe.Paper and other plant-based drinking straws are replacing plastic straws in commercial settings in response to trending plastic straw bans and the larger global movement for reducing plastic pollution. The water-resistant properties of many plant-based straws, however, may be attributed to the use of per- and polyfluoroalkyl substances (PFAS) during manufacturing. In this study, 43 brands of straws (5 plastic, 29 paper, 9 other plant-based) were analyzed for the presence of 53 semi-volatile PFAS using ultra high-performance liquid chromatography tandem mass spectrometry. While the plastic straws had no measurable PFAS, 21 PFAS were detected in the paper and other plant-based straws, with total mean PFAS concentrations (triplicate analysis) ranging from 0.043 ± 0.004 ng/straw to 29.1 ± 1.66 ng/straw (median = 0.554 ng/straw). Perfluorobutanoic acid (PFBA), perfluorooctanoic acid (PFOA) and perfluorohexanoic acid (PFHxA) were the most frequently detected species. In a follow-up experiment, the brand with the highest PFAS levels and most diversity was tested for leaching in water at initial temperatures of 4 °C, 20 °C, and 90 °C. Approximately 2/3 of the total extractable PFAS leached compared to the initial methanol extraction. Semi-volatile PFAS concentrations measured in this study may be the result of manufacturing impurities or contamination, as PFAS approved for food-contact use are, typically, polymeric species. The presence of PFAS in plant-based drinking straws demonstrates that they are not fully biodegradable, contributing to the direct human ingestion of PFAS and to the cycle of PFAS between waste streams and the environment.Arsenic (As) and As speciation in marine bivalves have been widely investigated. However, little is known about the bioaccumulation and biotransformation of inorganic As in different tissues of scallops. Therefore, the tissue-specific accumulation, biotransformation and subcellular partitioning of As were investigated in Chlamys farreri following 12 d inorganic As [arsenite (AsⅢ) and arsenate (AsⅤ)] exposure and 30 d depuration. Total As levels were highest in the kidneys and lowest in the adductor muscle after 12 d exposure for both As (Ⅲ) and As (Ⅴ) treatment groups, and the bioavailability of As (Ⅲ) was significantly higher than that of As (Ⅴ) for C. farreri. After 30 d elimination, total As levels were significantly decreased to the control levels. The subcellular fate of As in five different tissues was similar for different inorganic As treatment groups. The greatest proportion of As was found in the metallothionein-like protein fraction (MTLP) and the second was the cellular debris (CD). A little part of As (Ⅲ) could be oxidized to As (Ⅴ) in the gill and digestive gland for As (Ⅲ) treatment groups, and the reduction of As (Ⅴ) to As (Ⅲ) happened in the gill and kidney under As (Ⅴ) exposure. https://www.selleckchem.com/products/nvp-cgm097.html Although a high methylation activity was found in C. farreri, it varied in different tissues with different inorganic As species exposure. The present results indicated that exposure to As (Ⅲ) and As (Ⅴ) could induce different responses in bioaccumulation and biotransformation in five tissues of C. farreri.Toxic metals and silver nanoparticles (AgNPs) are of great importance as pollutants and their frequent use increases the risk of exposure to biota, but few studies have described co-toxic effects in aquatic organisms. In fish, the method using early stages of development are interesting parameters to validate ecotoxicological studies, and more recently, the use of mathematical models has substantially increased the efficiency of the method. Post hatching stages of native catfish Rhamdia quelen were exposed to single or combined mixtures of toxic metals (Mn, Pb, Hg or AgNPs) in order to study its effects. Fertilized eggs were exposed for 24, 48, 72, and 96 h, where hatching and survival rates, malformation frequency, and neuromast structure damages were evaluated. The results showed alterations in hatching rate after single and combined exposure to metals, but mixtures showed effects more severe comparatively with the single exposures. A similar result including a time-dependent effect was observed in survival rates and incidence of deformities. Overall, embryos and larvae were sensitive to toxic metals exposure while the mathematical modeling suggested a population reduction size including risk of local extinction.The threat of environmental pollution caused by spilled oil is rapidly increasing along with the expansion of oil exploration, the development of maritime activities and industrial growth. Oil spill incidents usually affect seriously the ecosystem and human life. Therefore, the treatment and recovery of the oil spill have been considered as an ultra-important issue to protect the environment and to minimize its negative impacts on socio-economic activities. Among methods of oil spill recovery, porous materials have emerged as potential absorbents possessing the capacity of absorbing spilled oil at a fast rate, high adsorption capacity, good selectivity, and high reusability. In this review paper, two types of polymer-based porous absorbents modified surface and structure were introduced for the treatment strategy of the oil-polluted water. In addition, the absorption mechanism and factors affecting the adsorption capacity for oils and organic solvents were thoroughly analyzed. More importantly, characteristics of polymer-based porous materials were discussed in detail based on microstructure analysis, absorption efficiency, and reusability.