To compare tooth movement rate and histological responses with three different force magnitude designs under osteoperforation in rabbit models.

48 rabbits were divided into three groups Group A, Group B, and Group C, with traction force of 50 g, 100 g, 150 g, respectively. Osteoperforation was performed at the mesial of the right mandibular first premolar, the left side was not affected. One mini-screw was inserted into bones between two central incisors. Coil springs were fixed to the first premolars and the mini-screw. Tooth movement distance was calculated, and immunohistochemical staining of PCNA, OCN, VEGF, and TGF-β1 was analyzed.

The tooth movement distance on the surgical side was larger than the control side in all groups (P<0.01). No significant intergroup difference was observed for the surgical side in tooth movement distance among the three groups (P>0.05). For the control side, tooth movement distance in Group A was significantly smaller than Groups B and C (P<0.001); no significant difference in tooth movement distance between Group B and Group C was observed (P>0.05). On the tension area of the moving premolar, labeling of PCNA, OCN, VEGF and TGF-β1 were confirmed in alveolar bone and periodontal ligament in all groups. PCNA, OCN, VEGF and TGF-β1 on the surgical side was larger than the control side in all groups (P<0.001).

Osteoperforation could accelerate orthodontic tooth movement rate in rabbits. Fast osteoperforation-assisted tooth movement in rabbits was achieve with light 50 g traction.
Osteoperforation could accelerate orthodontic tooth movement rate in rabbits. Fast osteoperforation-assisted tooth movement in rabbits was achieve with light 50 g traction.
We analyzed the effects of the ErYAG laser used with different parameters on dentinal tubule (DT) occlusion, intrapulpal temperature and pulp tissue morphology in order to determine the optimal parameters for treating dentin hypersensitivity.

Dentin specimens prepared from 36 extracted human third molars were randomized into six groups according to the treatment method (n=6 each) control (A); Gluma desensitizer (B); and ErYAG laser treatment at 0.5 W , 167 J/cm2 (50 mJ, 10 Hz) (C), 1 W , 334 J/cm2 (50 mJ, 20 Hz) (D), 2 W , 668 J/cm2 (100 mJ, 20 Hz) (E), and 4 W and 1336 J/cm2 (200 mJ, 20 Hz) (F). Treatment-induced morphological changes of the dentin surfaces were assessed using scanning electron microscopy (SEM) to find parameters showing optimal dentin tubule occluding efficacy. To further verify the safety of these parameters (0.5 W, 167 J/cm2), intrapulpal temperature changes were recorded during laser irradiation, and morphological alterations of the dental pulp tissue were observed with an upright microscope.

ErYAG laser irradiation at 0.5 W (167 J/cm2) were found to be superior in DT occlusion, with an exposure rate significantly lower than those in the other groups (P<0.05). Intrapulpal temperature changes induced by ErYAG laser irradiation at 0.5 W (167 J/cm2) with (G) and without (H) water and air cooling were demonstrated to be below the threshold. Also, no significant morphological alterations of the pulp and odontoblasts were observed after irradiation.

Therefore, 0.5 W (167 J/cm2) is a suitable parameter for ErYAG laser to occlude DTs, and it is safe to the pulp tissue.
Therefore, 0.5 W (167 J/cm2) is a suitable parameter for ErYAG laser to occlude DTs, and it is safe to the pulp tissue.We report the discovery that the earwig predator Doru luteipes (Scudder, 1876) (Dermaptera Forficulidae) feed on Puccinia polysora Underw uredospore, the causal agent of Southern Rust of Corn (SRC), which is a primary disease affecting the maize crop in Brazil. We performed experiments in laboratory and greenhouse to test the effect of D. https://www.selleckchem.com/products/nfat-inhibitor-1.html luteipes (1st/2nd and 3rd/4th instars, and adults) fungivory on the P. polysora uredospore concentration. All trials showed a significant reduction of the initial concentration of uredospore. There was a reduction in uredospore concentration with increase in number of D. luteipes feeding on them. We also tested the uredospore consumption by quantifying its percentage in the feces of D. luteipes. Nymphs of the 2nd, 4th instar and adults fed 88%, 85%, and 83.8% of the uredospore, respectively. For nymphs of the 3rd instar, the percentage of uredospore consumption (75.6%) was statistically significant compared with the other groups. In greenhouse experiment, at twenty-eight days after plant inoculation with 9.9 x 104 uredospores, the percentage of uredospore consumption was 81.7%. Our results confirmed the fungivory of D. luteipes on P. polysora uredospore. This is the first report of D. luteipes fungivory, which may play an important role in the biological control of P. polysora in corn.Malakand region is an endemic area for cutaneous leishmaniasis (CL). However, there are limited number of studies of this disease in Pakistan. Therefore, a study was conducted to understand the level of awareness attitude and practice among the residents of Makaland towards CL and the disease vectors. This study adopted a cross-sectional approach with a total of 400 respondents (n=93 rural and n= 307 urban). Overall, the population in Malakand region (61.2%) were well-informed in the role of sand fly in transmitting diseases, but most lack knowledge on the vector's behavior and almost a quarter (24.5%) were unable to provide knowledge on proper control measures. Alarmingly, the practice and attitudes of the general population was not satisfactory as close to half (49.8%) of the population did adopt any control method. This study calls for increase in awareness through health education campaign to reduce the risk of cutaneous leishmaniasis outbreaks in the future.As a result of biodiversity and ecosystem service losses associated with biological invasions, there has been growing interest in basic and applied research on invasive species aiming to improve management strategies. Tradescantia zebrina is a herbaceous species increasingly reported as invasive in the understory of disturbed forest ecosystems. In this study, we assess the effect of spatial and seasonal variation on biological attributes of this species in the Atlantic Forest. To this end, we measured attributes of T. zebrina associated with plant growth and stress in the four seasons at the forest edge and in the forest interior of invaded sites in the Iguaçu National Park, Southern Brazil. The invasive plant had higher growth at the forest edge than in the forest interior and lower leaf asymmetry and herbivory in the winter than in the summer. Our findings suggest that the forest edge environment favours the growth of T. zebrina. This invasive species is highly competitive in the understory of semi-deciduous seasonal forests all over the year.
To compare tooth movement rate and histological responses with three different force magnitude designs under osteoperforation in rabbit models. 48 rabbits were divided into three groups Group A, Group B, and Group C, with traction force of 50 g, 100 g, 150 g, respectively. Osteoperforation was performed at the mesial of the right mandibular first premolar, the left side was not affected. One mini-screw was inserted into bones between two central incisors. Coil springs were fixed to the first premolars and the mini-screw. Tooth movement distance was calculated, and immunohistochemical staining of PCNA, OCN, VEGF, and TGF-β1 was analyzed. The tooth movement distance on the surgical side was larger than the control side in all groups (P<0.01). No significant intergroup difference was observed for the surgical side in tooth movement distance among the three groups (P>0.05). For the control side, tooth movement distance in Group A was significantly smaller than Groups B and C (P<0.001); no significant difference in tooth movement distance between Group B and Group C was observed (P>0.05). On the tension area of the moving premolar, labeling of PCNA, OCN, VEGF and TGF-β1 were confirmed in alveolar bone and periodontal ligament in all groups. PCNA, OCN, VEGF and TGF-β1 on the surgical side was larger than the control side in all groups (P<0.001). Osteoperforation could accelerate orthodontic tooth movement rate in rabbits. Fast osteoperforation-assisted tooth movement in rabbits was achieve with light 50 g traction. Osteoperforation could accelerate orthodontic tooth movement rate in rabbits. Fast osteoperforation-assisted tooth movement in rabbits was achieve with light 50 g traction. We analyzed the effects of the ErYAG laser used with different parameters on dentinal tubule (DT) occlusion, intrapulpal temperature and pulp tissue morphology in order to determine the optimal parameters for treating dentin hypersensitivity. Dentin specimens prepared from 36 extracted human third molars were randomized into six groups according to the treatment method (n=6 each) control (A); Gluma desensitizer (B); and ErYAG laser treatment at 0.5 W , 167 J/cm2 (50 mJ, 10 Hz) (C), 1 W , 334 J/cm2 (50 mJ, 20 Hz) (D), 2 W , 668 J/cm2 (100 mJ, 20 Hz) (E), and 4 W and 1336 J/cm2 (200 mJ, 20 Hz) (F). Treatment-induced morphological changes of the dentin surfaces were assessed using scanning electron microscopy (SEM) to find parameters showing optimal dentin tubule occluding efficacy. To further verify the safety of these parameters (0.5 W, 167 J/cm2), intrapulpal temperature changes were recorded during laser irradiation, and morphological alterations of the dental pulp tissue were observed with an upright microscope. ErYAG laser irradiation at 0.5 W (167 J/cm2) were found to be superior in DT occlusion, with an exposure rate significantly lower than those in the other groups (P<0.05). Intrapulpal temperature changes induced by ErYAG laser irradiation at 0.5 W (167 J/cm2) with (G) and without (H) water and air cooling were demonstrated to be below the threshold. Also, no significant morphological alterations of the pulp and odontoblasts were observed after irradiation. Therefore, 0.5 W (167 J/cm2) is a suitable parameter for ErYAG laser to occlude DTs, and it is safe to the pulp tissue. Therefore, 0.5 W (167 J/cm2) is a suitable parameter for ErYAG laser to occlude DTs, and it is safe to the pulp tissue.We report the discovery that the earwig predator Doru luteipes (Scudder, 1876) (Dermaptera Forficulidae) feed on Puccinia polysora Underw uredospore, the causal agent of Southern Rust of Corn (SRC), which is a primary disease affecting the maize crop in Brazil. We performed experiments in laboratory and greenhouse to test the effect of D. https://www.selleckchem.com/products/nfat-inhibitor-1.html luteipes (1st/2nd and 3rd/4th instars, and adults) fungivory on the P. polysora uredospore concentration. All trials showed a significant reduction of the initial concentration of uredospore. There was a reduction in uredospore concentration with increase in number of D. luteipes feeding on them. We also tested the uredospore consumption by quantifying its percentage in the feces of D. luteipes. Nymphs of the 2nd, 4th instar and adults fed 88%, 85%, and 83.8% of the uredospore, respectively. For nymphs of the 3rd instar, the percentage of uredospore consumption (75.6%) was statistically significant compared with the other groups. In greenhouse experiment, at twenty-eight days after plant inoculation with 9.9 x 104 uredospores, the percentage of uredospore consumption was 81.7%. Our results confirmed the fungivory of D. luteipes on P. polysora uredospore. This is the first report of D. luteipes fungivory, which may play an important role in the biological control of P. polysora in corn.Malakand region is an endemic area for cutaneous leishmaniasis (CL). However, there are limited number of studies of this disease in Pakistan. Therefore, a study was conducted to understand the level of awareness attitude and practice among the residents of Makaland towards CL and the disease vectors. This study adopted a cross-sectional approach with a total of 400 respondents (n=93 rural and n= 307 urban). Overall, the population in Malakand region (61.2%) were well-informed in the role of sand fly in transmitting diseases, but most lack knowledge on the vector's behavior and almost a quarter (24.5%) were unable to provide knowledge on proper control measures. Alarmingly, the practice and attitudes of the general population was not satisfactory as close to half (49.8%) of the population did adopt any control method. This study calls for increase in awareness through health education campaign to reduce the risk of cutaneous leishmaniasis outbreaks in the future.As a result of biodiversity and ecosystem service losses associated with biological invasions, there has been growing interest in basic and applied research on invasive species aiming to improve management strategies. Tradescantia zebrina is a herbaceous species increasingly reported as invasive in the understory of disturbed forest ecosystems. In this study, we assess the effect of spatial and seasonal variation on biological attributes of this species in the Atlantic Forest. To this end, we measured attributes of T. zebrina associated with plant growth and stress in the four seasons at the forest edge and in the forest interior of invaded sites in the Iguaçu National Park, Southern Brazil. The invasive plant had higher growth at the forest edge than in the forest interior and lower leaf asymmetry and herbivory in the winter than in the summer. Our findings suggest that the forest edge environment favours the growth of T. zebrina. This invasive species is highly competitive in the understory of semi-deciduous seasonal forests all over the year.
0 Comments 0 Shares 90 Views 0 Reviews
Sponsored