cornuatus may shrink by 51 to 76% by 2090, depending on which climate change scenario comes to pass.In this study, a novel carbon-based solid acid catalyst was synthesized by carbonization of de-oiled microalgal biomass followed by sulfonation. The effect of catalyst synthesis conditions such as carbonization temperature, sulfonation time, and H2SO4 concentration on the surface acidity of the catalyst and free fatty acid conversion was determined. The de-oiled microalgal biomass-based solid acid (DMB) catalyst was predominantly composed of carboxylic, phenolic, and sulfonic groups as indicated by the FTIR analysis and supported by the XPS analysis. The catalyst was further characterized by various methods to determine its physiochemical properties. A maximum fatty acid methyl ester (FAME) yield of 94.23% for microalgal oil (AO) and 96.25% for waste cooking oil (WCO) was obtained under optimized transesterification conditions. The catalyst exhibited high catalytic activity (FAME yield >90%) until the fourth cycle. Most of the biodiesel properties were within the permissible limit of EN 14,212 and ASTM D6751 standards.The current study demonstrates the enhanced production capability of strain Cupriavidus sp. ISTL7 for polyhydroxyalkanoates (PHA) using acetate and glucose (4.93 ± 0.4571 g L-1) which was characterised analytically by GC-MS, FTIR and NMR analysis. Whole genome sequencing of strain ISTL7 unveiled an array of PHA metabolism genes which included phaA, phaB and phaC. Life cycle assessment of the protocol established that the production was most sustainable with the carbon source acetate. + Glucose as compared to acetate/glucose alone. It also concluded that solvent extraction of PHA and energy consumption during the process requires optimization to sustain the production on ecological fronts. https://www.selleckchem.com/products/adavivint.html Additionally, acetoacetyl-CoA reductase (phaB) gene was molecularly cloned, expressed and purified (27 KDa, 2.63 mg/ml). Conclusively, Cupriavidus sp. ISTL7 is a potential strain for PHA production with a scope of improvement on energy fronts which would transform the production environmentally and economically appealing.In recent years, 2, 5-furandicarboxylic acid (FDCA) has attracted much attention as the precursor of bio-polyester materials. A coupled process of ultrasonic-assisted dilute acid pretreatment and MnO2 was designed in this study to directly produce FDCA from lignocellulosic biomass, which is different from the traditional preparation process. Moreover, the critical parameters in the process were analyzed and optimized by the response surface method. The yield of FDCA could reach 52.1% under the optimal conditions. The reaction mechanism indicated that heavy metal elements in lignocellulosic biomass could play the role of the Lewis acid catalyst to promote the formation of FDCA to a certain extent. With the increase of temperature, the heavy metals transfer in biomass from the solid phase to the liquid phase increased, but most of them remain in the former. Therefore, further purification and treatment measures are worthy of attention.Composting is widely used as an easily operated and economical method to manage organic wastes. However, the long residence time of composting impedes the recycling nutrients from large amounts of organic wastes produced every day. In this study, the intelligent biodrying + continuous dynamic trough (IB + CDT) was created and used in China's first urban and rural organic waste treatment and utilization demonstration center in Suzhou city. Results showed that IB + CDT composting had higher temperature, more reduction of moisture than windrow composting, enhancing 40% of composting efficiency. Primary fermentation of the IB + CDT composting in the indoor conditions could achieve the harmless treatment (GI > 80%) of compost within 12 days. The IB + CDT composting product enhanced 17% soil organic matter and 11% available nitrogen. The IB + CDT composting mode could earn 57.6 USD/ton by recycling organic waste and producing organic fertilizer, leading to a sustainable and profitable mode.The resource utilization of biological solid waste is crucial for practical environmental remediation. By comprehensively utilizing LiBr treatment and dopamine chemistry, herein the cow dung waste was successfully converted into the composite biomass material for efficient heavy metal ions removal. A selective etching mechanism of cellulose was discovered in the LiBr treatment process, achieving the large-scale preparation of coralline-like porous biomass material with hundred times increased specific surface. Benefiting from the co-deposition of polyethyleneimine and Fe3O4, the fabricated material showed significantly higher adsorption capacity (183.82 and 231.48 mg·g-1 for Cu2+ and Cd2+) than that of raw cow dung (0.95 and 1.25 mg·g-1 for Cu2+ and Cd2+). Furthermore, this composite biomass adsorbent also exhibited rapid adsorption equilibrium, magnetic separation capability, monolayer chemisorption feature and feasible recycling use. Collectively, this work contributes to both the resource utilization of husbandry solid waste and the development of advanced biomass adsorbent.Waste biomass of Lactobacillus brevis obtained from in vivo γ-aminobutyric acid (GABA) production was used for value-addition. This study aims to extract glutamate decarboxylase (GAD) and characterize it for in vitro GABA production. Extracted GAD showed an excellent activity for in vitro GABA production. 52 W ultrasonic output was best in crude GAD extraction which was purified by Q HP anion-exchange column followed by Superdex-200 colloid separation column. The molecular weight of the purified GAD was determined to be ~53 kDa, and the Km value for L-glutamic acid was calculated ~7.65 mM. Pyridoxal 5'-phosphate (PLP) acted as the best cofactor for GAD. Optimum temperature and PLP dosing were deferring for crude and purified enzyme forms which respectively exhibited at 45°C, 55°C, 200 µmol and 20 µmol whereas optimum pH was the same at 4.5. GAD finds applications in food industries hence its detailed characterization would be promising for commercial exploitations.