In this work, a Monte Carlo ray-tracing model for the simulation and optimization of a fiber Luminescent Solar Concentrator (LSC) based on stacked layers of fiber arrays is developed and validated. The fiber LSC efficiency improvements are compared against a conventional planar LSC. We developed a new model to analyze the performance of different configurations of bulk-doped fibers and fibers constituted by a doped coating and a passive core. These configurations are analyzed also varying fiber packing geometry diameters, and length. Due to the exceptionally low absorption coefficient of the silica fibers (αwg ≈ 10-4 cm-1), concentration factors of up to 1.9 are predicted when dimensions are scaled over 1 m2, which improve more than twice the maximum concentration factor ever reported. These results serve as a preliminary theoretical study for the future development of a new LSC design based on flexible silica micro-fibers coated with Si-QDs doped poly(lauryl methacrylate) (PLMA) layers.A highly productive ablation process of 100 nm thick platinum films with a processed area rate of up to 378 cm2/min is presented using radially and azimuthally polarized laser beams. This was achieved by developing a laser amplifier generating 757 fs long laser pulses at a maximum average power of 390 W and a repetition rate of 10.6 MHz with adjustable polarization states, i.e., linear, radial, and azimuthal polarization on the work piece. The pulse train emitted from the laser was synchronized to a custom-designed polygon scanner and directed into an application machine.In this paper, we propose and design a multi-orbital-angular-momentum multi-ring air-core fiber, which has seven high-index rings with each ring supporting 62 radially fundamental OAM modes across C and L bands (from 1530 nm to 1625 nm), i.e. 434 OAM modes in total. The designed fiber features >4×10-4 intra-ring modal indices difference for OAM modes with the same topological charge l in a ring across the C and L bands. Moreover, it can keep less then -52 dB crosstalk between the OAM modes in the adjacent rings at 1550 nm, and less then -24 dB crosstalk across C and L bands after 100-km fiber propagation. This kind of seven-air-core-ring fiber would be a robust candidate for transmitting efficient OAM modes and boosting the capacity of optical fiber communications systems.In this work, we study topological edge and corner states in two-dimensional (2D) Su-Schrieffer-Heeger lattices from designer surface plasmon crystals (DSPCs), where the vertical confinement of the designer surface plasmons enables signal detection without the need of additional covers for the sample. https://www.selleckchem.com/EGFR(HER).html In particular, the formation of higher-order topological insulator can be determined by the two-dimensional Zak phase, and the zero-dimensional subwavelength corner states are found in the designed DSPCs at the terahertz (THz) frequency band together with the edge states. Moreover, the corner state frequency can be tuned by modifying the defect strength, i.e., the location or diameter of the corner pillars. This work may provide a new approach for confining THz waves in DSPCs, which is promising for the development of THz topological photonic integrated devices with high compactness, robustness and tunability.We fabricated a fiber-optic directional coupler based on evanescent field coupling between side-polished large mode area (LMA) double clad fibers (DCFs) for a high power fiber laser. The tapping ratio of the fabricated coupler was measured to be - 32 dB. The fundamental mode coupled in a core of the lower side-polished fiber (SPF) was transferred to the upper SPF without clad-mode coupling. Two SPFs were directly faced to increase an optical handling power up to 740 W. The tapping ratio of the coupler was constantly maintained at the applied laser output. The beam quality of the laser including the fabricated coupler was maintained to be 1.22, without mode distortion by the coupler.We propose and experimentally demonstrate a microwave frequency measurement system based on the photonic technique. An amplitude comparison function is constructed to perform frequency-to-power mapping based on a non-sliced broadband optical source. The results are fed into a machine learning module which can be utilized to minimize the differential mode noise of the system caused by the polarization fluctuation. The system is reconfigurable with adjustable measurement bandwidth by adjusting the dispersion group delay of the signals at orthogonal polarizations by a polarization division multiplexed emulator (PDME). In addition, the mapping relationship is reconstructed by stacking method. The results are fed into four machine learning models support vector regressor (SVR), KNeighbors regressor (KNN), polynomial regressor (PR) and random forest regressor (RFR). The output of the four models then combined by adding them together using linear regression method. By fitting the relationship between frequency and microwave power ratio with machine learning method, the accuracy of microwave frequency measurement system is further improved. The results show that for a measurement system with a bandwidth of 2 GHz and 4 GHz, the maximum error and the average measurement errors are all reduced. The results are promising for applications of modern radar and electronic warfare systems.The single-shot spatiotemporal characterization of an ultrahigh intensity laser pulse was performed using a multispectral wavefront sensor. For the measurement of the spatio-spectral electric field, a femtosecond laser pulse was spectrally modulated and separated by a Fabry-Perot etalon coupled with a grating pair, and its spatio-spectral electric field was measured with a wavefront sensor. The spatiotemporal electric field was reconstructed from the measured spatio-spectral electric field of a multi-PW laser pulse. We found that the spatiotemporal distortion could reduce the focused laser intensity by 15%, compared to the case of a diffraction-limited and transform-limited laser pulse.We report on a compact optical frequency comb, operating in the wavelength range from 670 to 1500 nm, based on diode-pumped low-noise femtosecond YbCALGO amplified laser system. Both the carrier-envelope offset and repetition rate are phase-locked to reference synthesizers. A full characterization of the frequency comb, in terms of frequency stability, phase noise analysis, and optical beating against a single-frequency non-planar ring oscillator NdYAG laser, is presented, showing the excellent properties of the YbCALGO comb.