Nanomaterials could be a robust candidate for the removal of an array of environmental contaminants in water.A lot of studies on spinel ferrites (MFe2O4, M = divalent metal ion) and their binary nanocomposites as photocatalysts in the decontamination of wastewater have been performed, because MFe2O4 nanoparticles are relatively stable, biocompatible and low-cost efficient photocatalyst. The separation of MFe2O4 photocatalyst is easy owing to its excellent magnetic behavior. With this background, the recent developments on photocatalytic performances of MFe2O4 based binary nanocomposites were comprehensively reviewed. Especially, a focus on MFe2O4/metal oxides, MFe2O4/carbon based materials, MFe2O4/polymers, MFe2O4/metal nanoparticles and MFe2O4/other compounds for the photocatalytic degradation of dyes, emerging contaminants and inorganic pollutants has been thoroughly given. The advantages of MFe2O4 based nanocomposites as photocatalysts were also discussed. In addition, the possible pathway of active free radical generation by these photocatalysts under visible and ultraviolet irradiation has been explained. A comparison of photocatalytic activities of MFe2O4 based binary nanocomposites with recent reports has been carried out. This review concludes that MFe2O4 based binary nanocomposites have potential capacity in water purification technology. Nevertheless, their practical utilization in water treatment plants still needs to be further studied.Cyanobacteria and their toxins present potential hazard to consumers of water from lakes, reservoirs and rivers, thus their removal via water treatment or at the source, is essential. Here, we report that alkyltrimethylammonium (ATMA) surfactants, such as octadecyltrimethylammonium (ODTMA) bromide, act as cyanocides that efficiently inhibit photosynthesis and growth of cyanobacteria. Green algae were found less sensitive than cyanobacteria to ATMA compounds. https://www.selleckchem.com/products/4-Methylumbelliferone(4-MU).html Fluorescence measurements and microscopic observations demonstrated that cyanobacteria cells (Aphanizomenon or Microcystis) disintegrate and lose their metabolic activity (photosynthesis) upon exposure to ATMA bromides (estimated ED50(1hr) ranged between 1.5 and 7 μM for ODTMA-Br or hexadecyltrimethylammonium (HDTMA) bromide). Other ATMA compounds, such as tetradecyltrimethylammonium (TDTMA) or dodecyltrimethylammonium (DDTMA) bromides had similar inhibitory effect but their toxicity to cyanobacteria (measured as ED50(1hr) for photosynthetic efficiency) decreased, as the length of the alkyl chain decreased. All ATMA compounds used in this study showed lower toxicity to green algae than to cyanobacteria. A toxicity mechanism for ATMA cations is proposed, based on real time fluorescence signals and on alteration of cell ultra-structure revealed by electron microscopy. The present study sheds light on the toxic effect of ATMA surfactants on cyanobacteria and its potential application for controlling the occurrence of cyanobacterial bloom in lakes, reservoirs or rivers to secure the safety of drinking water and to mitigate and manage bloom events.Solar light-active silver nanoparticle (Ag NP) and nonmetal nitrogen (N)-codoped zinc oxide (ZnON/Ag) nanocomposites were fabricated by a pulsed laser-assisted method. N was considered as a promising candidate for tailoring the bandgap of ZnO due to the similar atomic radius as well as lower ionization energy and electronegativity compared to oxygen, which resulted in the formation of a shallow acceptor level in ZnO. Moreover, Ag NPs could enhance the optical properties of the ZnO materials as a consequence of the surface plasmon resonance (SPR) effect. The synthesized ZnON/Ag composite materials were characterized by X-ray diffraction (XRD), micro-Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDS), UV-vis diffuse reflectance spectroscopy (UV-DRS), and photoluminescence (PL) analysis. The photocatalytic activity of the ZnON/Ag materials was evaluated for the efficient degradation of Rhodamine B (Rh.B) under solar light irradiation. The optimized ZnON/Ag-2 nanocomposite exhibited six times higher Rh·B degradation rate than pure ZnO. This was attributed to the enhanced absorption behavior in the solar region as well as the formation of the Schottky junction between ZnON and Ag NPs, which resulted in effective charge separation. In addition, the scavenger study revealed that •O2- radicals facilitated the degradation of Rh.B. The reusability test of the ZnON/Ag nanocomposite confirmed high photostability and efficiency of the material in each successive cycle. The present investigation illustrates a rational design of metal and nonmetal-codoped ZnO nanostructures employing a pulsed laser-assisted technique for effective application in photocatalytic remediation of wastewater.Bisphenol A (BPA), a typical endocrine disrupting chemical, widely exists in water and threatens human health. The degradation of BPA by ozone in water is limited by the gas-mass transfer due to the low solubility of ozone. In this study, a rotating packed bed (RPB) was employed to create a high gravity environment to intensify the ozone mass transfer and BPA degradation. The effects of operational parameters (rotation speed of RPB, pH of the solution, ozone concentration, BPA concentration, gas volumetric flow rate and liquid volumetric flow rate) on BPA degradation efficiency and overall volumetric mass transfer coefficient of ozone were investigated. The results show that RPB effectively promoted the ozone mass transfer and BPA degradation and can be used for the ozonation of micropollutants that have fast reaction rates with ozone. Quenching experiments suggest that both ozone and HO∙ participated in BPA degradation from acidic to alkaline environments. In addition, the effects of co-existing chemicals on BPA degradation efficiency were studied. The addition of H2O2 or Cl- had no obvious impact on BPA degradation; the addition of HCO3- is beneficial for BPA degradation while the addition of fulvic acid suppressed the degradation. These results indicate that the pH value, which affects the reaction rate between ozone and BPA, is a major factor to be considered during the ozonation of BPA in RPB.